Introduction: YC-015 Micro Laboratory Spray Dryer (Experimental Spray Dryer) is a crystal developed by our company and PILOTECH in the field of experimental spray drying. The compact design of the unit can be independently placed in the laboratory or placed in a specially designed stainless steel frame, which is self-contained and can be operated without additional facilities. One-button start-up, color large LCD touch screen operation, can be fully automatic or manual monitoring two operating modes, easy to operate and monitor the experimental process. It is a spray dryer with small volume, low noise and excellent drying effect. YC-015 micro laboratory spray dryer is mainly used in the production of micro-particle powder in universities, research institutes and food and pharmaceutical chemical enterprises. It has broad-spectrum applicability to all solutions such as emulsions and suspensions, and is suitable for thermal sensitivity. Drying of materials such as biological products, biological pesticides, enzyme preparations, etc., because the materials ejected are only subjected to high temperature when sprayed into mist-sized particles, so they are only heated instantaneously, and can maintain the activity of these active materials after drying. The ingredients are not destroyed. Features: 1. Color large touch screen operation, automatic control and manual control combined, unique features: 2. Full-automatic control: one-button start-up, after setting the spray process parameters, the temperature reaches the predetermined temperature, the peristaltic pump starts itself, the running animation is displayed on the touch screen, and the running process is clearly displayed; just press the stop button when shutting down, the machine is automatically safe. Shut down. Manual control: If the process parameters need to be adjusted during the experiment, it is convenient to switch to the manual state. The color touch screen is dynamically displayed (animation) throughout the experiment. 3. Shutdown protection function: Just press the stop button when shutting down, the machine will stop running immediately except the fan, to ensure that the equipment will not burn out due to misoperation (forced off the fan). 4. The spray, drying and collection system is made of transparent high-quality borosilicate heat-resistant glass material, which makes the spray drying process in a non-polluting and stable environment, and allows the whole spray drying process to be directly observed. The personnel control the experimental process and the experimental results provide great convenience and can find problems in time. All glass components are easy to disassemble and easy to clean. Built-in imported oil-free air compressor, the diameter of the powder is normally distributed, the fluidity is very good, and the noise is very low, less than 60db, in line with national laboratory noise standards; 5. The atomization structure of the two-fluid spray, the whole machine is precision-made by high-quality stainless steel material, compact in design, no need for auxiliary equipment, convenient to use, and lasts for a long time. 6. The design of temperature control adopts real-time regulation PID constant temperature control technology to make the temperature control in the whole temperature zone accurate and the heating temperature control precision ±1 °C. 7. In order to keep the sample clean, an air inlet filter is provided. 8. The feed amount can be adjusted by the feed peristaltic pump, and the minimum sample volume can reach 50ml. Magnetic stirrer optional The dried powder after drying has a relatively uniform particle size, and more than 95% of the dry powder is in the same particle size range. 9. For the sticky material, there is a nozzle cleaner (through needle), which will automatically clear when the nozzle is blocked, and the frequency of the needle can be automatically adjusted; 10. Innovative tower wall purging device with higher material recovery rate. Technical Parameters 1) Full control mode of automatic control and manual control, dynamic display of color touch screen during the whole experiment process (animation) 2) Inlet air temperature control: 30 °C ~ 300 °C 3) Outlet temperature control: 30 °C ~ 140 °C 4) Evaporation water: 1500mL/H ~ 2000ml/h 5) Maximum feeding amount: the peristaltic pump can be adjusted up to 2000ml/h 6) Minimum feed amount: 50mL 7) The spray head is a concentric spray head. When atomizing, ensure that there is no eccentricity and it is sprayed to the side of the bottle wall. After the spray head is installed, it can be moved up and down to facilitate the adjustment of the atomization position to improve the spray drying effect; 8) Real-time regulation of PID constant temperature control technology, heating temperature control accuracy: ± 1 ° C 9) Drying time: 1.0 to 1.5S 10) Shutdown protection function: Just press the stop button when shutting down, the machine will stop running immediately except the fan to ensure that the equipment will not burn out due to misoperation (forced off the fan). 11) Color LCD touch screen parameter display: air inlet temperature / air outlet temperature / peristaltic pump speed / air volume / needle frequency 12) Nozzle diameter: 0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm optional, and can be customized according to requirements 13) With a nozzle cleaner (passing needle), it will automatically clear when the nozzle is blocked, and the frequency of the needle can be adjusted automatically. 14) The whole machine is made of stainless steel, the atomization structure of the two-fluid spray, the spray, drying and collecting system is made of transparent high-quality borosilicate heat-resistant glass material. 15) Built-in imported oil-free air compressor, the particle diameter of the powder is normally distributed, the fluidity is good, and the noise is very low, in line with the national laboratory noise standard; 16) Machine power: 3KW / 220V 17) Tower wall purging device, higher material yield 18) Spray head cooling device (optional) 19) Can be directly upgraded to a nitrogen circulation system for drying organic solvent materials 20) Equipment size: 1200mm (height) × 650mm (length) × 500mm (width)
Introduction: YC-015 Micro Laboratory Spray Dryer (Experimental Spray Dryer) is a crystal developed by our company and PILOTECH in the field of experimental spray drying. The compact design of the unit can be independently placed in the laboratory or placed in a specially designed stainless steel frame, which is self-contained and can be operated without additional facilities. One-button start-up, color large LCD touch screen operation, can be fully automatic or manual monitoring two operating modes, easy to operate and monitor the experimental process. It is a spray dryer with small volume, low noise and excellent drying effect. YC-015 micro laboratory spray dryer is mainly used in the production of micro-particle powder in universities, research institutes and food and pharmaceutical chemical enterprises. It has broad-spectrum applicability to all solutions such as emulsions and suspensions, and is suitable for thermal sensitivity. Drying of materials such as biological products, biological pesticides, enzyme preparations, etc., because the materials ejected are only subjected to high temperature when sprayed into mist-sized particles, so they are only heated instantaneously, and can maintain the activity of these active materials after drying. The ingredients are not destroyed.
