Brief introduction:
YBC25-10/0.5 electronic is collecting sample extensometer continuous deformation within range of the sensor. According to GB / 12160-12160 / ISO9513; 1999 "uniaxial test with that of extensometer calibration standards, is now widely used for 0.5% of the value for accuracy, this series of resistance strain chip stretch gauge is suitable for various sample within the range of deformation measurement, and measuring amplifier, strain gauge and other secondary instrument of deformation measurement system, the accurate determination of specimen deformation within the range, and the signal input to the computer or function recorder curve, data processing and mapping experiment is indispensable for modern mechanics test measuring instruments.
Usually extensometer is mainly composed of parts, fastening device (rubber band, transverse compression spring, radial clamping spring), arms and elastomers. On the elastic body with a set of resistance strain slice and the whole bridge. In the arms in front of the gauge positioning mechanism, use a pin to accurate positioning. When trials, fixed stretch in the sample, and then be sure to remove the pin, edge on sample extensometer relative displacement and deformation of the specimen, elastomers have caused deformation, strain gauge that deformation of the output signal of the whole bridge. Technical indicators:
Range (mm) : 25, 50, 100, 200, 500, 600;
Range (mm) : 2.5, 5, 10, 15, 20, 25
Brief introduction:
YBC25-10/0.5 electronic is collecting sample extensometer continuous deformation within range of the sensor. According to GB / 12160-12160 / ISO9513; 1999 "uniaxial test with that of extensometer calibration standards, is now widely used for 0.5% of the value for accuracy, this series of resistance strain chip stretch gauge is suitable for various sample within the range of deformation measurement, and measuring amplifier, strain gauge and other secondary instrument of deformation measurement system, the accurate determination of specimen deformation within the range, and the signal input to the computer or function recorder curve, data processing and mapping experiment is indispensable for modern mechanics test measuring instruments.
