Brief introduction: GS - 350 reinforced deformation, extensometer residual deformation measuring instrument used for mechanical connection of reinforced mechanical connection reinforced participate in the test of the deformation, follow rules on JGJ107-2010 reinforced mechanical connection technology. Can also be used for hot rolling, cold rolling rib steel, its elastic modulus E, the cylindrical specimen Rp0.2 extension strength test. Features: 1. Can record the specimen deformation in two directions at the same time. 2. Suitable for all different specifications of the steel. 3. According to the specifications of the steel, the length of the connected set of gauge extensometer. Technical indicators: 1. Scope of range: 0-350 (mm) 2. Apply sample specifications: Φ 50 or less (mm) 3. The dividing value: 0.01 mm 4. Fine degrees: 0.01 mm 5. Volume range: 20 mm
Brief introduction: GS - 350 reinforced deformation, extensometer residual deformation measuring instrument used for mechanical connection of reinforced mechanical connection reinforced participate in the test of the deformation, follow rules on JGJ107-2010 reinforced mechanical connection technology. Can also be used for hot rolling, cold rolling rib steel, its elastic modulus E, the cylindrical specimen Rp0.2 extension strength test.
