Brief introduction Y09-550 laser dust particle counter is used to measure the size and number of dust particles in the air environment, which can be directly detected in the clean level of three hundred thousand to ten level of clean environment, in order to adapt to the national new policy and new guidance and development of a new generation of products. This instrument uses semiconductor laser light source, touch screen display, the structure is reasonable, high detection accuracy, high flow, sampling time is short, functional operation is simple and clear, without the need of computer data acquisition, can be directly stored in U disk storage media, can be stored, print sampling results, built-in thermal micro printer, test environment is very convenient. Instruments are widely used in electronic, optical, chemical, food, chemical, food, cosmetics, medicine and health, biological products, aerospace and other departments. Technical parameter 1, size 320 x 272 x 240 (length x width x height) (unit: mm) 2, weight 6kg 3, the maximum power consumption 80W 4. DC16.8V Battery Built-in power supply Lithium size channel :0.5,1.0,3.0,5.0,10.0,25.0 (um) 6, the sampling period 0~999999s 7, the sampling rate of 50L/min 8, the use of environmental temperature: 10℃~35℃ Humidity: 20% - 75% Atmospheric pressure: 86kPa - 106kPa 9, allowing maximum sampling concentration Degree 35000 /L (particle diameter less than 0.5 m), air sampling Gas Should not contain corrosive gases such as acid and alkali 10, measuring position 0~9999 11, print built-in thermal printer 12, data storage 20000 groups of measurement data UCL group /300 (with PC special communication software) 13, the light source and the lifetime: semiconductor laser source, the life is longer than 30000 hours 14, self purification time less than 10min 15, typical working hours 5 hours
Brief introduction Y09-550 laser dust particle counter is used to measure the size and number of dust particles in the air environment, which can be directly detected in the clean level of three hundred thousand to ten level of clean environment, in order to adapt to the national new policy and new guidance and development of a new generation of products. This instrument uses semiconductor laser light source, touch screen display, the structure is reasonable, high detection accuracy, high flow, sampling time is short, functional operation is simple and clear, without the need of computer data acquisition, can be directly stored in U disk storage media, can be stored, print sampling results, built-in thermal micro printer, test environment is very convenient. Instruments are widely used in electronic, optical, chemical, food, chemical, food, cosmetics, medicine and health, biological products, aerospace and other departments.
