XRW－300E Thermal Deformation•Vicat Softening Point Temperature Tester
Introduction: XRW-300E thermal deformation and Vicat softening point temperature tester is designed with international and national standards to determine the thermal softening performance of plastic materials or finished products. This instrument is controlled by a PC. The PC is connected to a lower computer through a USB interface or a serial port. It adopts self-developed control software. The software can be used for parameter setting, test control, automatic drawing of temperature curves, saving and printing test results, and instrumentation Calibration and other functions. At the same time, it provides a dual-control model of PC and local controller. This model can be controlled by a computer or can be controlled by a local controller without a computer, which is more flexible. Features: 1. Support the thermal deformation test of various samples specified by the standard. 2. Support various Vicat softening point tests specified by the standard. 3. Optimized constant speed heating algorithm, the heating process is stable and accurate. 4. The software corrects displacement error and temperature error. 5. The hardware adjusts the temperature error. 6. Freely set the upper limit temperature, deformation amount and Vicat penetration depth. 7. Freely set the heating rate. 8. The test will automatically stop when the upper limit temperature or deformation is reached. Technical parameter: Temperature control range: room temperature -300℃. Heating rate: arbitrarily set. Temperature measurement method: PT100 sensor, single point measurement Temperature resolution: 0.1℃ Temperature error: ±0.5℃ Deformation measurement method: LVDT sensor Deformation measurement range: 0-2mm Deformation measurement error: 0.01mm Deformation measurement resolution: 0.005mm Structure: desktop Number of sample racks: 3 standard, multiple sample racks can be customized Thermal deformation test span adjustment range: 60mm-180mm Heating medium: methyl silicone oil (suitable for room temperature -300℃, viscosity requirement below 100CS) or transformer oil (used within 200℃) Fuel tank capacity: about 30 liters Heating power: 4KW Power supply: 220V±10% 25A 50Hz Cooling method: natural cooling or circulating water cooling Host size: 580×550×310mm
Introduction: XRW-300E thermal deformation and Vicat softening point temperature tester is designed with international and national standards to determine the thermal softening performance of plastic materials or finished products. This instrument is controlled by a PC. The PC is connected to a lower computer through a USB interface or a serial port. It adopts self-developed control software. The software can be used for parameter setting, test control, automatic drawing of temperature curves, saving and printing test results, and instrumentation Calibration and other functions. At the same time, it provides a dual-control model of PC and local controller. This model can be controlled by a computer or can be controlled by a local controller without a computer, which is more flexible.
