XRW-300UB heat distortion temperature measuring instrument
Introduction: XRW-300UB heat distortion temperature measuring instrument is suitable for the determination of thermal deformation and Vicat softening point temperature of various non-metallic materials. This model is controlled by Taiwan Delta PLC (programmable controller), with high temperature control precision, small temperature gradient and temperature upper limit protection. Second, the applicable standards: GB/T1633, GB/T1634, GB/T8802, ISO75, IS0306 Features: 1. The sample holder is an integrated structure with a small expansion coefficient and the experimental data is true and accurate. 2, Taiwan Taiwan Delta PLC modular independent electronic control system control, different product components can be used interchangeably, easy to operate, stable performance, high precision, long service life, low maintenance and maintenance costs. 3. The three-station high-precision displacement sensor is integrated with the PLC electronic control system. Compared with the low-end machine (measured by the dial gauge, the single-chip control system), the machine does not require manual intervention during the test, and each station test is completed. The LCD screen records the deformation and deformation temperature of the station sample. The other station tests are not affected. Until all the tests are completed, the system automatically stops heating, indicating that the test has been completed and the experimental results are automatically stored. 4. The heating medium box is made of 304 stainless steel, and the interlayer is filled with asbestos insulation. Compared with the ordinary galvanized sheet medium box, it has anti-aging, anti-corrosion, and does not peel off at high temperature. Technical Parameters: 1, temperature control range: room temperature -300 ° C 2. Heating rate: 50 °C / h error ± 0.5 ° C / 6 min 120°C/h error ±1.0°C/6min 3, temperature resolution: 0.1 ° C 4, deformation measurement method: displacement sensor 5, deformation measurement range: 0-1mm (standard configuration) 0-3mm (non-standard configuration) 6, deformation resolution: 0.001mm 7, the number of sample racks: three 8, sample span: 64-100mm 9, heating medium: methyl silicone oil 10, power supply: AC220V ± l0%, 50Hz 11, cooling method: circulating water cooling 12, model: floor type
Introduction: XRW-300UB heat distortion temperature measuring instrument is suitable for the determination of thermal deformation and Vicat softening point temperature of various non-metallic materials. This model is controlled by Taiwan Delta PLC (programmable controller), with high temperature control precision, small temperature gradient and temperature upper limit protection. Second, the applicable standards: GB/T1633, GB/T1634, GB/T8802, ISO75, IS0306
