Brief introduction: Melt index apparatus conform to the requirements of the standard of GB/T3682-2000, melt index instrument main parameters but also meet the requirement, ASTM1238 ISO1133-97 standard can be used to can be used in polyethylene, polyethylene splendid alkene, polystyrene, ABS, polyamide, fiber resin, acrylic ester, polyformaldehyde, fluorine plastic, polycarbonate and so on the many kinds of plastic material quality of the melt flow rate (MFR) or melt volume flow rate (MVR) to proceed with determination; Features: 1. The instrument is controlled by microprocessor and integration, digital measurement and control technology. According to the standard test procedure for procedural Settings. 2. Heating speed, high precision constant temperature; After packing, can quickly restore the constant temperature condition. 3. Chinese caijing, according to the voice prompt, touch screen operation, easy to understand. 4. Imported double temperature control table, high control precision, stable temperature control precision. 5. Automatic cutting material, can cut hard plastic. (B, 6. Can match displacement measurement method, the optical coupling) have a larger volume method was used to measure index of materials; 7. The micro printer to print the data. 8. Nickel chrome metal die casting with rare alloy material, with the use of high temperature for a long time to burn not bad characteristics. Technical parameters: Temperature control range: room temperature - 450 ℃ Temperature control precision: plus or minus 0.2 ℃ Display resolution: 0.1 ℃ The biggest power: 500 W or less The temperature recovery time: 4 min The piston position detection (MVR) Top and bottom ring distance: 30 mm Displacement control accuracy: + / - 0.1 mm Test range: 0.03-450 - g / 10 min
Brief introduction: Melt index apparatus conform to the requirements of the standard of GB/T3682-2000, melt index instrument main parameters but also meet the requirement, ASTM1238 ISO1133-97 standard can be used to can be used in polyethylene, polyethylene splendid alkene, polystyrene, ABS, polyamide, fiber resin, acrylic ester, polyformaldehyde, fluorine plastic, polycarbonate and so on the many kinds of plastic material quality of the melt flow rate (MFR) or melt volume flow rate (MVR) to proceed with determination;
