XN-104I Integrated Input Liquid Level Transmitter Introduction: The XN-104I series immersion type liquid level transmitter is composed of a fully sealed isolation membrane filled oil level sensor and a dedicated instrument circuit. The product adopts a process sealed structure, with good anti immersion and leakage performance, and reliable long-term immersion in liquid. The product has the advantages of high precision, good stability, long service life, and easy installation. This liquid level transmitter is widely used in water plants, refineries, chemical plants, glass plants, sewage treatment plants, high-rise water supply systems, reservoirs, rivers, oceans, etc. for measuring and controlling the static and dynamic liquid levels of various liquids in water supply tanks, distribution tanks, water treatment tanks, wells, water tanks, oil wells, oil tanks, and oil tanks. characteristic: 1. 316L stainless steel isolation membrane structure 2. High precision, all stainless steel structure 3. Strong anti-interference ability and good long-term stability 4. Transmission through gas conducting cables 5. Anti condensation and lightning protection design 6. Explosion proof design Technical parameters: Range: 0~1, 2, 5, 10, 30... 200m Overload pressure: 2 times full range Measurement medium: Liquid compatible with 316L stainless steel Output signal: 4-20mA 0-10mA two-wire system 1-5VDC 0-5VDC three wire system Supply voltage: 12-36VDC (calibrated value is 24VDC) Accuracy: ± 0.5% F.S ± 0.25% F.S ± 0.1% F.S Long term stability: ≤± 0.2% F.S/year Compensation temperature: -10 to+70 ℃ Medium temperature: -20 to+85 ℃ Storage temperature: -40 to+125 ℃ Response time: ≤ 1 ms Load resistance: R=(U-12.5)/0.02-RD Among them: U is the power supply voltage, RD is the internal resistance of the cable Lifespan:>1 × 108 pressure cycle (25 ℃) Diaphragm material: 316L stainless steel Shell material: 1Cr18Ni9Ti Pressure interface: Input type Electrical connection: cable outlet, terminal block Explosion proof grade: ExiaICT6 Protection level: IP67
Introduction: The XN-104I series immersion type liquid level transmitter is composed of a fully sealed isolation membrane filled oil level sensor and a dedicated instrument circuit. The product adopts a process sealed structure, with good anti immersion and leakage performance, and reliable long-term immersion in liquid. The product has the advantages of high precision, good stability, long service life, and easy installation. This liquid level transmitter is widely used in water plants, refineries, chemical plants, glass plants, sewage treatment plants, high-rise water supply systems, reservoirs, rivers, oceans, etc. for measuring and controlling the static and dynamic liquid levels of various liquids in water supply tanks, distribution tanks, water treatment tanks, wells, water tanks, oil wells, oil tanks, and oil tanks.
