X light tube |
Type |
Cu target , NF type |
Focal spot |
1.0x10mm2 |
Maximum Output |
2kW |
X-ray Generator |
Maximum Output |
3 kW |
X-ray tube voltage |
15~60kV |
Tube voltage step width |
1kV |
X-ray tube current |
6~50mA |
Tube current step width |
1mA |
Tube voltage , tube current stability |
≤0.01% ( 10% of supply voltage fluctuations ) |
Alarm device |
Low kV, high kV, mA overload, water flow and temperature |
Ray power protection |
0.35,0.7,1.0,1.5,2.0,2.7kW Six files |
Goniometer |
Goniometer scanning radius |
180mm |
Measured sample forms |
Samples horizontal stationary |
Scanning way |
θs-θd linkage or θs, θd single action |
Scanning angle range |
-30°~80° (θs) -30°~160°(θd) |
Working mode |
Continuous scan , time step scan , a set number of step-scan |
Continuous scanning speed |
0.125°~120°/min |
Angle repeatability |
0.0006° |
Measurement Accuracy |
0.001° |
Minimum step angle |
0.00025° |
Divergence slit (DS) |
0.15°,0.5°,1°,2° |
Anti-scatter slit (SS) |
0.5°,1°,2° |
Receiving slit (RS) |
0.1,0.15,0.30,0.45,0.6,1,2mm |
Zero special slit |
0.02mm |
Detection · Counter |
Detector Type |
Scintillation crystals counter |
Crystal type |
NaI |
Detector noise |
≤1cps |
Pulse amplitude analyzer (PHA) |
Output voltage of 0 ~ 1000 v, the stability of 0.01% or less (8 h) |