Introduction: Measure the cone into the depth of the measured object within 5 seconds (or a different time interval). Its unit to 0.1mm for a cone into the degree. The greater the degree of penetration, the more soft the sample, and the harder it is. The measurement method conforms to the national standard GB / T269-91, carries on the compact structure design, the liquid crystal display, the automatic data gathering And the corresponding statistical calculation, print output measurement report. Can be connected to the PC output data. The whole measurement process is very simple, in full compliance with the provisions of the State Pharmacopoeia. The measurement results are accurate, with good repeatability and system stability. Technical indicators: Measuring cone weight: 150 g ± 0.1 g, with cone + conical + taper rod + connector 122.21 ± 0.07 g Measuring range: 0 ~ 500 cone into the unit Minimum reading: 0.1 cone into the unit Timing range: 1 ~ 9.9 seconds Timing error: ≤0.02 seconds Repeatability: <2 + 0.03P, P is the arithmetic mean of the two measurements Stability: Δu ≤ 0.2 Power supply: AC220V ± 10%, 50Hz ± 2% Dimensions L × B × H (mm): 340 × 280 × 600
Introduction: Measure the cone into the depth of the measured object within 5 seconds (or a different time interval). Its unit to 0.1mm for a cone into the degree. The greater the degree of penetration, the more soft the sample, and the harder it is. The measurement method conforms to the national standard GB / T269-91, carries on the compact structure design, the liquid crystal display, the automatic data gathering And the corresponding statistical calculation, print output measurement report. Can be connected to the PC output data. The whole measurement process is very simple, in full compliance with the provisions of the State Pharmacopoeia. The measurement results are accurate, with good repeatability and system stability.
