Introduction: SC-269 Cone Penetration Analyzer is based on the national standard GB / T269 << Grease and oil cone penetration degree method >>, and with reference to the international standard ISO2137 << Grease and oil cone penetration degree >> Design and manufacture, Applicable to the determination of various grease and petroleum fat cone penetration test. Can also be equipped with the relevant standard parts for solid particles, powder, powder, all kinds of paste, gum material. Widely used in medicine, electronics, food field. Features: 1. The measuring mechanism consists of digital scale, cone electric lock, manual button and timer. 2. With fine-tuning feet screw, by adjusting the foot screw can easily adjust the level of the base table. 3. Support and up and down mediation agencies: by the support rod, support arm and the upper and lower thickness adjustment knob. 4. Adjust the hand wheel speed two blocks, with self-locking function, easy to operate. Technical indicators: Working power: AC220V ± 10% 50HZ Measuring range: 0 ~ 600 cone into the unit Release stroke: 62mm or more Digital caliper: 0 ~ 100 mm Display accuracy: 0.01 mm Minimum reading: 0.1 cone into the unit Timing range: 5 seconds Grease Worker: Meet GB / T269-91 standard Measuring cone: ① full-size cone quality 102.5 ± 0.05g cone rod quality 47.5 ± 0.05g ② 1/2 ratio of vertebral body mass 37.5 ± 0.05g 1/2 cone weight 15 ± 0.025g ③ 1/4 ratio of vertebral body and cone rod total mass 9.38 ± 0.025g
Introduction: SC-269 Cone Penetration Analyzer is based on the national standard GB / T269 << Grease and oil cone penetration degree method >>, and with reference to the international standard ISO2137 << Grease and oil cone penetration degree >> Design and manufacture, Applicable to the determination of various grease and petroleum fat cone penetration test. Can also be equipped with the relevant standard parts for solid particles, powder, powder, all kinds of paste, gum material. Widely used in medicine, electronics, food field.
