Introduction: WZ-8022 lubricating oil anti-emulsification performance tester meets the requirements of national standard GB/T8022 "Determination of lubricating oil anti-emulsification performance". It is suitable for the determination of the separation of oil and water from medium and high viscosity lubricants. Features: The lubricating oil anti-emulsification performance measuring instrument is composed of a water bath, a sample stirring device, a separating funnel holder, and a temperature control device. The temperature of the water bath is controlled by a digital temperature control meter. The digital temperature control meter has accurate temperature control, intuitive display and convenient operation. When the bath temperature is lower than the set value of the temperature control table, the temperature control table operates the heater through the solid state relay. When the bath temperature is higher than the set value of the temperature control table, the temperature control table stops the heater through the solid state relay, and then The bath temperature is made constant by the action of the stirring device. The sample stirring device adopts a stepless speed regulating motor (continuously adjustable from 0 to 6000 r/min). At the same time, the sample stirring device can adjust the position up, down, left and right. The structure of the instrument is reasonable in design, beautiful in appearance and convenient in operation. Technical Parameters 1, temperature control range: room temperature ~ 99.9 ° C 2, temperature control accuracy: ± 1 ° C 3, heating power: 1.6KW 4. Sample stirring motor: 92W, 0~6000r/min 5, the power supply voltage: AC220V ± 10%, 50HZ
Introduction: WZ-8022 lubricating oil anti-emulsification performance tester meets the requirements of national standard GB/T8022 "Determination of lubricating oil anti-emulsification performance". It is suitable for the determination of the separation of oil and water from medium and high viscosity lubricants.
