Introduction: WTF5600-colitech online analyzer is used to monitor the value of Escherichia coli in medical wastewater and drinking water. The instrument is based on the national standard or industry standard, and has the characteristics of simple operation, high degree of automation, easy maintenance, and low cost of consumables. The instrument is equipped with RS485/RS232 interface as standard, supports MODBUS protocol, and can perform remote communication on its operating status and data. Comprehensive control can also be remotely controlled to realize advanced functions such as remote analysis, remote calibration, and remote cleaning. The analysis accuracy and other indicators are better than the relevant national standards. This product is suitable for: hospital sewage, drinking water sources, automatic monitoring stations for surface water quality, outlets of sewage treatment plants, etc. Features: WTF5600-colitech ensures that the detection is selective and sensitive. The automatic sampling frequency can be adjusted within the range of 6 times per hour and once every 24 hours. Colilert reagent (enzyme substrate method) is a good method for culturing Escherichia coli and Escherichia coli base. Advanced microelectronics technology ensures the reliability of the results. Based on classic analysis algorithms, the patented Polynosis standardized algorithm is used for data derivation. The pipeline and operation are simplified, only need to connect the medicine, sample, waste liquid pipeline and power line during installation, and the parameters can be set to start. Built-in data storage, can be stored for a long time, support USB export. Low maintenance, fully automatic operation, short preparation time, no special electrician training; low liquid consumption, low operation and maintenance costs, and reduce secondary pollution. Technical Parameters: Analysis method: enzyme substrate method Analysis range: 0-100MPN/100mL, 0-10000MPN/100mL (expandable) Detection limit: 1MPN/mL Resolution: 1% Error: standard solution <10%; water sample <10% Repeatability: 5% Range drift: ±5% F.S. Alarm: Lack of liquid alarm; self-check alarm; fault alarm; over-standard alarm (one-way relay) Data: One 4-20mA analog quantity Communication: a RS232 or RS485 interface standard MODBUS protocol Storage: about 20,000 groups (automatically saved after power off); support U disk export to EXCEL; Printing: Mini industrial thermal printer (optional) Maintenance cycle: about 30 days, 45 minutes Display unit: 7-inch LCD, 800*480 resolution, TFT true color touch screen Use environment: 5—35℃, humidity <90% (non-condensing) Water sample temperature: 5—35℃ Water collection unit: used for the circulation and retention of water samples; automatic back-flushing precision filtration system (optional) Dimensions: 1650×530×430mm (including reagent cabinet) Weight: 45KG (including reagent cabinet) Power source: AC 220V ± 10%, 50Hz ± 1% Work rate: 150W
Introduction: WTF5600-colitech online analyzer is used to monitor the value of Escherichia coli in medical wastewater and drinking water. The instrument is based on the national standard or industry standard, and has the characteristics of simple operation, high degree of automation, easy maintenance, and low cost of consumables. The instrument is equipped with RS485/RS232 interface as standard, supports MODBUS protocol, and can perform remote communication on its operating status and data. Comprehensive control can also be remotely controlled to realize advanced functions such as remote analysis, remote calibration, and remote cleaning. The analysis accuracy and other indicators are better than the relevant national standards. This product is suitable for: hospital sewage, drinking water sources, automatic monitoring stations for surface water quality, outlets of sewage treatment plants, etc.
