Introduction: WKT-CP10 Pneumatic Punching Machine Polymer materials such as rubber, plastic, leather, paper or metal materials, such as non-ferrous metals, soft metal sheets such as copper and aluminum, films and other materials suitable for punching, when testing the mechanics of the above materials performance, in accordance with national standards such as GB528-2009 (T) Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber, GB228-2008 Room temperature tensile test method for metal materials, GB/T1040.3-2006 Plastic tensile properties, sample It needs to be made into a dumbbell shape or a dumbbell shape. At this time, it is necessary to use a dumbbell cutter with the cooperation of a pneumatic punching machine to achieve the preparation of the tensile sample. The principle of WKT-CP10 pneumatic punching machine: Pneumatic punching machine is also called pneumatic press, mainly composed of: cylinder, punching seat, pressure reducing valve, fixing screws and other components. It uses the compressed air provided by the compressed air pump to enter the cylinder through the solenoid valve, and drives the piston to the main shaft to form a downward movement of the main shaft, thereby forming an impulse, so that the workpiece can be deformed in the mold to achieve the purpose of processing. For convenience For the use of customers, the electrical control part is also added to the equipment, which greatly improves the efficiency of work. Application field: WKT-CP10 pneumatic punching machine is used for punching standard rubber test pieces before tensile test in rubber, plastic, wire, cable, hose belt and other industries and scientific research units. For similar materials, this machine can also die-cut technical parameter: Product Model: WKT-CP10 Punching stroke: 0-100mm Working air pressure: 0.6-0.8Mpa Table size: 210*250mm Dimensions: 310*470*690(mm)
Introduction: WKT-CP10 Pneumatic Punching Machine Polymer materials such as rubber, plastic, leather, paper or metal materials, such as non-ferrous metals, soft metal sheets such as copper and aluminum, films and other materials suitable for punching, when testing the mechanics of the above materials performance, in accordance with national standards such as GB528-2009 (T) Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber, GB228-2008 Room temperature tensile test method for metal materials, GB/T1040.3-2006 Plastic tensile properties, sample It needs to be made into a dumbbell shape or a dumbbell shape. At this time, it is necessary to use a dumbbell cutter with the cooperation of a pneumatic punching machine to achieve the preparation of the tensile sample. The principle of WKT-CP10 pneumatic punching machine: Pneumatic punching machine is also called pneumatic press, mainly composed of: cylinder, punching seat, pressure reducing valve, fixing screws and other components. It uses the compressed air provided by the compressed air pump to enter the cylinder through the solenoid valve, and drives the piston to the main shaft to form a downward movement of the main shaft, thereby forming an impulse, so that the workpiece can be deformed in the mold to achieve the purpose of processing. For convenience For the use of customers, the electrical control part is also added to the equipment, which greatly improves the efficiency of work. Application field: WKT-CP10 pneumatic punching machine is used for punching standard rubber test pieces before tensile test in rubber, plastic, wire, cable, hose belt and other industries and scientific research units. For similar materials, this machine can also die-cut
