Sales Winner2006 automatic wet laser particle size analyzer，Manufacturer

Position: Home > > Physical property test > Granule/powder analysis instrument > Laser particle size analyzer > Winner2006 automatic wet laser particle size analyzer

Winner2006 automatic wet laser particle size analyzer

Product ID：WLjg073

Price: Please inquire PDF Format

Supply Ability:80 SETS/MON

Port:SHENZHEN

Product Introduction
Consulting

Model NumberWinner2006

Brand NameJINANWEINAKELI

Payment TermsT/T, paypal

Winner2006 automatic wet laser particle size analyzer
Introduction
Winner2006 fully automatic wet laser particle size analyzer has opened up a new field of wide distribution particle testing. The advanced testing principle, unique calculation mode and one-key automatic calibration method make this instrument have the outstanding advantages of accurate test results, good test repeatability and high resolution. It is the best choice for wide distribution particle size testing.
Winner 2006 automatic wet laser particle size analyzer is widely used in cement, ceramics, pharmaceuticals, emulsions, coatings, dyes, pigments, fillers, chemical products, catalysts, drilling mud, abrasives, lubricants, coal powder, sand, dust, cells, bacteria , Food, additives, pesticides, explosives, graphite, photosensitive materials, fuel, ink, metal and non-metal powders, calcium carbonate, kaolin, coal water slurry and other powdery materials.
Features
Large range design, the upper test limit can reach 1000 microns, using dual laser orthogonal beam patented technology, the lower test limit is down to 0.01 microns.
Intelligent operation mode, support one-key operation. Click "Auto Test", add samples as prompted, and all other operations are completed automatically. Not only reduces the workload of testers, but also eliminates the interference error of human factors.
The precision four-step hybrid stepping motor is used to form the optical path automatic centering system, and the micro-motion precision reaches the micron level, so that the optical path of the instrument is always in the best state.
Unconstrained free fitting technology: The unconstrained free fitting technology independently developed by Micro Nano, particle size analysis is not restricted by any function, and can truly reflect the distribution state of particles.
Adopt a fully built-in dispersion system: use a high-power circulation pump to optimize the design of the pipeline, so that the overall control coordination is improved to a new level, and the secondary precipitation of large particles is effectively prevented.
Technical parameters

Specification model		Winner2006A		Winner2006B
Executive Standard		ISO13320-1:1999，GB/T19077.1-2008，Q/0100JWN001-2013
Test Range		0.01-780μm	0.1-1000μm
Number of detector channels		68	49
Accuracy error		<0.5% (D50 value of national standard sample)
Repeatability error		<0.5% (D50 value of national standard sample)
Laser parameters		Main laser source: US imported semiconductor fiber laser λ = 650nm, p> 2mW Auxiliary laser source: semiconductor laser, λ = 650nm, p> 2mW, service life:> 25000H
Built-in dispersion method	Ultrasound	Frequency: f = 40KHz, power: p = 35W, time: ≥1S
	Stir	Speed: 0-3000rpm adjustable speed
	cycle	Rated flow: 10L / min Rated power: 15W
	Sample cell	Capacity: 450mL
Operating mode		Software operation / fully automatic operation mode can be switched
Automatic alignment system		Automatic alignment system
Software function	Analysis mode	Including free distribution, R-R distribution and logarithmic normal distribution, grading statistical mode according to mesh, etc., to meet the different requirements of different industries on the statistical method of sample size measurement.
	Statistical methods	Volume distribution and quantity distribution to meet different statistical methods for particle size distribution in different industries.
	Statistical comparison	Statistical comparison and analysis can be performed on multiple test results, which can clearly compare the differences between different batches of samples, samples before and after processing, and test results at different times, which has a strong practical significance for the quality control of industrial raw materials.
	Custom analysis	User-defined analysis parameters, find percentage based on particle size, calculate particle size according to percentage, or calculate percentage according to particle size interval, to meet the characterization of particle size testing in different industries.
	testing report	The test report can export documents in various forms such as Word, Excel, Picture (Bmp), and Text (Text) to meet the test results cited in the test report and scientific research articles in any occasion.
	Multilingual support	Chinese and English language interface support, and other language interfaces can also be embedded according to user requirements.
	Intelligent operation mode	With intelligent operation mode, it can automatically control the steps of water intake, dispersion, and testing, which not only reduces the workload of testers, but also has better repeatability of test results due to no human factors.
Test speed		<2min / time
volume		850mm390mm450mm
weight		40Kg

Introduction
Winner2006 fully automatic wet laser particle size analyzer has opened up a new field of wide distribution particle testing. The advanced testing principle, unique calculation mode and one-key automatic calibration method make this instrument have the outstanding advantages of accurate test results, good test repeatability and high resolution. It is the best choice for wide distribution particle size testing.
Winner 2006 automatic wet laser particle size analyzer is widely used in cement, ceramics, pharmaceuticals, emulsions, coatings, dyes, pigments, fillers, chemical products, catalysts, drilling mud, abrasives, lubricants, coal powder, sand, dust, cells, bacteria , Food, additives, pesticides, explosives, graphite, photosensitive materials, fuel, ink, metal and non-metal powders, calcium carbonate, kaolin, coal water slurry and other powdery materials.