Product overview: Sterile test separator tank from the sterilization cabin, two hull and vaporization of hydrogen peroxide sterilization machine and so on, the relay tank samples (with packaging container), test equipment, culture medium and sterilization processing buffer (using hydrogen peroxide gas vaporization sterilization) was carried out on the surface of microorganism, in sterile by RTP, sterile passed into the lab to check (or microbial limit inspection). The isolator is made of hard (or soft and strong) body structure, and the inner material is made of 316 stainless steel or non-toxic PVC, while the outer material is made of 304L stainless steel or non-toxic PVC. The cleanliness of the cabin conforms to the requirement of GMP A grade. The control system can be used for automatic control operation and operation detection. Transfer of internal materials is operated through the gloves provided by the isolator (the gloves need to be tested for leakage regularly, and pressure attenuation method). After sterilization, internal cleaning is carried out through H14, an efficient filter in and out of the port, so that a-level laminar (or turbulent) flow is maintained continuously inside the cabin. The laboratory chamber is equipped with a microbiometer for sterility test and microbial limit test. After the inspection, the isolator is sent through the external door. Main material: Cabin: non-toxic PVC (PVC thick 4mm); Rack: SUS304L pipe; Gate: SUS304L processing; Sealing parts: silicon rubber or fluorine rubber; Sleeves and gloves: north Hypalon (or PVC plastic); Other structural parts: SUS304 processing; Main technical parameters: Metal materials: 304 stainless steel, 316L stainless steel; Non-metallic materials: PVC, silica gel; Power supply: AC220V plus or minus 22V; Frequency: 50Hz + / - 1Hz Power: no more than 2500W; Touch screen: Siemens touch screen / 12-inch tablet; Control: Siemens PLC; Pressure adjustment range in cabin: -80~80Pa; Humidity zui low resolution: 0.1%; Low temperature zui resolution: 0.1 ℃; Pressure zui low resolution: 0.1pa; Leakage rate: no more than 0.5%vol/h; Noise: 65 db (A) or less; High efficiency filter: H14 level; Illumination: 500 lx or higher; Model of isolator flow: turbulent flow; VHP sterilization cycle time: transfer window: no more than 50 minutes, operation cabin: no more than 2.5 hours (subject to actual verification). Description of basic functions and features: PLC programmable controller program automatic control; Human - machine dialogue interface of touch liquid crystal screen, humanized design; Third level administrator password access; Computer telecommunication function (optional); UBS interface data export and print function; Automatic and manual operation mode; Temperature, humidity and pressure difference monitoring function; Pressure loss alarm function (audible and visual signals); Lighting in the cabin: luminance greater than or equal to 300lx (cold light source); Waterproof and sterile socket in the cabin (company); The detection orifice of particle, plankton and sedimentation is reserved. Reserve sterilization interface (the buyer provides basic parameter information); Reserved high-efficiency filter PAO/DOP test port; Catalytic decomposition function of sterilizer.
Product overview: Sterile test separator tank from the sterilization cabin, two hull and vaporization of hydrogen peroxide sterilization machine and so on, the relay tank samples (with packaging container), test equipment, culture medium and sterilization processing buffer (using hydrogen peroxide gas vaporization sterilization) was carried out on the surface of microorganism, in sterile by RTP, sterile passed into the lab to check (or microbial limit inspection). The isolator is made of hard (or soft and strong) body structure, and the inner material is made of 316 stainless steel or non-toxic PVC, while the outer material is made of 304L stainless steel or non-toxic PVC. The cleanliness of the cabin conforms to the requirement of GMP A grade. The control system can be used for automatic control operation and operation detection. Transfer of internal materials is operated through the gloves provided by the isolator (the gloves need to be tested for leakage regularly, and pressure attenuation method). After sterilization, internal cleaning is carried out through H14, an efficient filter in and out of the port, so that a-level laminar (or turbulent) flow is maintained continuously inside the cabin. The laboratory chamber is equipped with a microbiometer for sterility test and microbial limit test. After the inspection, the isolator is sent through the external door.
