Introduction: The testing machine is suitable for many kinds of tests such as stretching, compressing, bending, shearing, stripping and tearing of metal and nonmetal materials, such as rubber, plastic, wire and cable, composite material, plastic profile, Plate, spring, components and so on. Executable GB, ISO, JIS, DIN, ASTM and other test standards. And according to user needs editing test software. Is the quality inspection units, research departments, universities, industrial and mining enterprises necessary testing equipment. Technical Parameters: Maximum test force: 10kN Test force measurement range: 0.1-10kN Test force accuracy: better than ± 0.5% Test force resolution: the maximum test force of 1/500000, the entire process regardless of file. Beam displacement measurement resolution: ≥0.001; Displacement rate control range: 0.001mm / min-500mm / min stepless speed regulation, arbitrarily set Relative displacement error: better than ± 0.3% of indication; Force control rate control range: 0.005-5% FS / s; Force control error rate: ≤ ± 0.5%; Beam running distance (without fixture): 1000mm Column spacing: 420mm Power: 380V ± 10%, 50Hz; Host weight: about 450kg; Working environment: room temperature ~ 30 ℃, the relative humidity does not exceed 80%; Product configuration 1, servo drive: Japan Panasonic servo drive 2, servo motor: Japan's Panasonic servo motor 3, load cell: the United States World Group precision load cell brand 4, screw: precision ball screw 5, fixture: standard configuration of stretching, compression fixture; 6, Tianchen three closed-loop measurement system, the use of force, displacement, strain and other control methods, the test process can be real-time display force - displacement, force - time, stress - strain and other test curves and can be automatically derived Maximum load, tensile strength, elongation at break and many other parameters. 7, Lenovo brand computers, widescreen LCD; 8, printer: HPA4 color inkjet printer. TENSON: Dedicated test software TENSON: Tianchen Group independently developed and tested GB, ISO, JIS, DIN, ASTM and other test standards. It is fully open, powerful and easy to operate. It provides free upgrade software and can be customized according to user requirements Self-editing test software. Features: 1, the host 1.1 imported full digital AC servo motor and servo drive; The system has high control precision, good stability, stable and reliable operation, fast response, low noise, and overload, overcurrent, overvoltage, undervoltage, overheating, abnormal stop, fault Alarm and other complete protection, and according to different models and test parameters to adjust the type, the servo system running in the best condition, the use of servo position control system, the interface unit to achieve a digital, to overcome the speed of the ring Zero drift and low speed instability. 1.2 using precision ball screw and precision gear transmission, transmission smooth, low noise, no gaps. 2, measurement and control systems, operating software and data processing system High-precision data acquisition board (24-bit A / D data acquisition) can be fully digital adjustment, high precision amplification and precise control (built in the computer). Advanced chip integration technology, high precision ± 500000 code acquisition card, the sensor's measurement accuracy to the limit. With high integration, stable and reliable, easy to use and so on. Control software can automatically calculate the elastic modulus, yield strength, tensile strength, breaking strength and other conventional data, can automatically calculate the test process any specified point of force, stress, displacement, deformation and other data results. 2.1 automatically cleared: test began, the measurement system automatically zero; 2.2 Automatic shutdown: After the sample is broken, the mobile beam automatically stops; 2.3 Automatic Calibration: The system can automatically calibrate the indication accuracy; 2.4 Automatically save: test data and test conditions automatically save, to prevent loss of data due to forgetting to save; 2.5 Automatic Transmission: During the test beam speed can be automatically changed according to the pre-set procedures can also be manually changed; 2.6 Automatic Control: According to test requirements can choose test speed, displacement, strain and other closed-loop control; 2.7 Program Control: The user can customize the multi-step control program according to the need and according to some programming specifications. 2.8 Automatic preservation: the end of the experiment, the experimental data and curves are automatically saved; 2.9 batch test: the same parameters of the sample, a set can be followed by the completion of a number of tests; 2.10 automatic analysis: According to the relevant standard requirements, automatic analysis of test data. 2.11 Curve Traversal: After the experiment is completed, the curve can be analyzed, and the data corresponding to each point on the test curve can be found by the mouse. 2.12 curve selection: According to the need to choose the stress - strain, force - displacement, force - time, displacement - time curve display and print; and can reflect the specimen at a glance under the tensile force of the failure process and the specimen at every point Data analysis. 2.13 Automatic Analysis: Any section of the test curve can be amplified for local analysis. 2.14 Batch Processing: The multiple test data and curve summary summary and print. 2.15 Test Report: A variety of report editing methods (Exsel \ World \ Advanced Custom), users can edit their own report format 2.16 limit protection: a programmable and mechanical limit protection; 2.17 overload protection: when the load exceeds the rated value of 2% to 10%, automatically shut down. 2.18 LAN connection: to retain the data interface, can be directly connected to the lab's comprehensive information management network.
Introduction: The testing machine is suitable for many kinds of tests such as stretching, compressing, bending, shearing, stripping and tearing of metal and nonmetal materials, such as rubber, plastic, wire and cable, composite material, plastic profile, Plate, spring, components and so on. Executable GB, ISO, JIS, DIN, ASTM and other test standards. And according to user needs editing test software. Is the quality inspection units, research departments, universities, industrial and mining enterprises necessary testing equipment.
