Introduction: The machine is widely used in mechanical properties testing of metal, metal bar, metal pipe, sheet metal and metal profile and composite materials, with special fixture is also suitable for tensile, compression, stripping, shearing, tearing, Bending (folding), metal welding strength, riveting strength test. Can print a number of data, according to the different data to make a graphical output comparison, control of high precision, easy to operate; modular design, all kinds of accessories available accessories, with flexible. This machine is mainly suitable for testing various mechanical properties such as tensile, compression and bending of various materials. It can also realize multi-cycle test with constant stress, constant strain, creep, relaxation, axial and radial. Tensile strength, yield strength, elongation, set elongation stress (arbitrary percentage), set stress elongation (any percentage), elastic modulus, elongation at break , Peel strength, flexural modulus, tear strength, bond strength, shear strength and other parameters. Technical Parameters: Equipment Name: Double column floor electronic universal testing machine Equipment specifications, model: WBE-9909B Maximum test force: 50kN, 100kN, 200kN, 300kN, 500kN, 600kN A standard machine with a range up to three optional range Accuracy class: 0.5 level Load parameters Test force measurement range: 0.2% ~ 100% FS (full scale) Test force indication error: Indication of ± 0.5% Test force resolution: the maximum test force of / 350000, the entire process without distinction, and the whole resolution unchanged Large deformation parameters Large deformation measurement range: 10 ~ 800mm Large deformation indication error: Indication of ± 0.5% Large deformation measurement resolution: 0.008mm Displacement parameters Displacement indication error: Indication of ± 0.2% or less Control parameters Stress control rate range: 0.005 ~ 5% FS / s Stress control rate accuracy: within ± 2% of setpoint at <0.05% FS / s and within ± 0.5% of setpoint at rate> 0.05% FS / s; Strain control rate range: 0.005 ~ 5% FS / s Strain control rate accuracy: within ± 2% of setpoint at <0.05% FS / s and within ± 0.5% of setpoint at rate> 0.05% FS / s; Displacement control rate range: 0.001 ~ 500mm / min / 0.001 ~ 250mm / min Displacement control rate accuracy: within ± 0.2% of setpoint Force control rate of relative error: less than + 1% of the set value Constant stress, constant strain, constant displacement control range: 0.5% ~ 100% FS Constant stress, constant shape, constant displacement control accuracy: set value ≥ 10% FS, within ± 1% of the set value, the set value ≥ 10% FS, Displacement resolution within ± 0.1% of setpoint: 0.015μm Host parameters Dimensions (length, width and height): about 1065 × 815 × 2085mm ((high press 1000mm test space)) Dimensions can be agreed Test space: Single space (beam upper and lower space) 1200mm 1000mm 800mm 600mm (or agreed) Double space (the beam down the pressure, the beam down the pressure) 1000mm 800mm 600mm (or agreed) Effective test width: 420mm / 550mm (or agreed) Power: 380V (600KN) 50Hz, ± 10% Power: 5KW (600KN) Host weight: about 1200KG (600KN)
Introduction: The machine is widely used in mechanical properties testing of metal, metal bar, metal pipe, sheet metal and metal profile and composite materials, with special fixture is also suitable for tensile, compression, stripping, shearing, tearing, Bending (folding), metal welding strength, riveting strength test. Can print a number of data, according to the different data to make a graphical output comparison, control of high precision, easy to operate; modular design, all kinds of accessories available accessories, with flexible. This machine is mainly suitable for testing various mechanical properties such as tensile, compression and bending of various materials. It can also realize multi-cycle test with constant stress, constant strain, creep, relaxation, axial and radial. Tensile strength, yield strength, elongation, set elongation stress (arbitrary percentage), set stress elongation (any percentage), elastic modulus, elongation at break , Peel strength, flexural modulus, tear strength, bond strength, shear strength and other parameters.
