Sales UC-3060 Preparative high-pressure infusion pump，Manufacturer

Position: Home > > Analytical instruments > Chromatogram > Chromatography high pressure pump > UC-3060 Preparative high-pressure infusion pump for liquid chromatography system

UC-3060 Preparative high-pressure infusion pump for liquid chromatography system

Product ID：FSbeng001

Price: Please inquire PDF Format

Supply Ability:200 SETS/MON

Port:SHENZHEN

Product Introduction
Consulting

Model NumberUC-3060

Brand NameYIMA

Payment TermsT/T, paypal

Product Overview
UC-3286 Preparative high-pressure infusion pump
This pump adopts double plunger parallel real-time pulse compensation design, can
provide low pulsating flow velocity, can be configured for binary high pressure gradient infusion control system.
By four retaining screws unscrew the pump head front of the replacement of the pump head , pump head
cleaning and and plunger seal replacement .
The pump can be made of the chromatography workstation software reverse control,
such as degree and
binary high pressure gradient parameter setting and operation of the system. The pump
can also be out of the control of workstations at the same time, run independently, can
also through the rear panel of the RS232
interface will two pump together, form a binary high pressure gradient, one of them is
given priority to pump,
another auxiliary pump, gradient program for editing in the main pump, gradient elution to realize independent don't depend on the workstation
Performance indicators

system structure	Double piston parallel, ceramic plunger rod (AL2O3)
Flow rate accuracy	3% ( 2-50% of the maximal value of the flow rate range ; methanol: water 80:20)
Reproducibility	<0.5%
Pulsation	Suppressing fluctuations in real-time by electronic means
System Protection	Software up and running , you can set the adjustable minimum maximum pressure limit
Pumphead introduced
Pumphead type(mL)	100	250	500	1000
Flow rate range(mL/min)	0.1—99.9	0.1—249.9	0.1—449.9	0.1—999.9
Maximum pressure(MPa)	40	20	10	5
Control Interface	RS232,RS485
Power supply	100/240VAC,50/60Hz,480W
Dimensions / Weight	380×190×420 (W×H×D)/ 10 kg

UC-3286 Preparative high-pressure infusion pump
This pump adopts double plunger parallel real-time pulse compensation design, can
provide low pulsating flow velocity, can be configured for binary high pressure gradient infusion control system.
By four retaining screws unscrew the pump head front of the replacement of the pump head , pump head
cleaning and and plunger seal replacement .
The pump can be made of the chromatography workstation software reverse control,
such as degree and
binary high pressure gradient parameter setting and operation of the system. The pump
can also be out of the control of workstations at the same time, run independently, can
also through the rear panel of the RS232
interface will two pump together, form a binary high pressure gradient, one of them is
given priority to pump,
another auxiliary pump, gradient program for editing in the main pump, gradient elution to realize independent don't depend on the workstation