Introduction: The use of X-ray diffraction principle, the determination of natural and man-made single crystal (piezoelectric crystal, optical crystal, laser crystal, semiconductor crystal) cutting angle of precision and rapid, and cutting machine equipped with directional cutting can be used for the above crystal, is the precision machining crystal Device indispensable instrument. The instrument is widely used in crystal materials research, processing and manufacturing industries. TYX-200 X-ray crystal directional measuring accuracy of ± 30 ", the display mode is digital, the minimum reading of 10". TYX-2H8 X-ray crystal orientation meter is based on the TYX-200 type, to improve goniometer structure, an increase of load-bearing track, X-tube casing, stent body, the sample stage increased, measuring 1 to 30 kg , 2 to 8 inch diameter samples. Angle display: digital mode, measurement accuracy ± 30 ". Features: Easy to operate, does not require professional knowledge and skilled skills. Digital display point of view, easy to observe, reducing the reading error. The display can be zeroed in any position for easy display of wafer angle deviation. Double goniometer can work at the same time, improve the efficiency. Special integrator with peak amplification improves detection accuracy. X-ray tube and high-voltage cable integration, increase high-voltage reliability, high voltage detector using DC high-voltage module, vacuum suction sample board, to improve the accuracy and speed of measuring angle. Technical Parameters: X-ray tube: copper target, anode grounding, forced air cooling Tube voltage: 30KVP Tube current: 0-5mA, continuously adjustable Sensitivity: better than ± 30 " 2θ angle display: in degrees, minutes and seconds display, the minimum reading of 10 " 2θ angle measurement range: -10 ° - +100 ° θ angle measurement range: -10 ° - +50 ° Counting tube: Geiger counting tube, working voltage 100-1100V Time constant: 0.1, 0.4 seconds Overall dimensions: 1140mm × 650mm × 1030mm Weight: 300Kg
Introduction: The use of X-ray diffraction principle, the determination of natural and man-made single crystal (piezoelectric crystal, optical crystal, laser crystal, semiconductor crystal) cutting angle of precision and rapid, and cutting machine equipped with directional cutting can be used for the above crystal, is the precision machining crystal Device indispensable instrument. The instrument is widely used in crystal materials research, processing and manufacturing industries. TYX-200 X-ray crystal directional measuring accuracy of ± 30 ", the display mode is digital, the minimum reading of 10". TYX-2H8 X-ray crystal orientation meter is based on the TYX-200 type, to improve goniometer structure, an increase of load-bearing track, X-tube casing, stent body, the sample stage increased, measuring 1 to 30 kg , 2 to 8 inch diameter samples. Angle display: digital mode, measurement accuracy ± 30 ".
