TRGT-1 Automatic Calcium Iron Silicon (Magnesium) Rapid Analyzer Introduction: TRGT-1 automatic calcium iron silicon (magnesium) rapid analyzer, mainly used for limestone, can quickly measure the percentage content of calcium, iron, silicon, and (magnesium) in limestone, monitor the quality of incoming raw materials, and lay a solid foundation for the quality of subsequent deep processed products. It can also be used to detect the percentage content of total calcium, iron, and silicon in quicklime and hydrated lime. The calcium in quicklime includes calcium oxide (effective calcium) and calcium carbonate (ineffective calcium); Lime contains calcium hydroxide, calcium carbonate, and calcium oxide; Moreover, quicklime and hydrated lime are active and in contact with air and moisture, the chemical composition of calcium is constantly changing. As long as the user handles the sample properly, the data obtained for detecting quicklime and hydrated lime can be used as a reference. characteristic: 1. The analysis time is short, and it can accurately measure the percentage content of calcium, iron, silicon, and magnesium in materials such as limestone in as little as 60 seconds. 2. No need for any chemical reagents, minimal consumables, low power consumption (30W), environmentally friendly and energy-saving. 3. The instrument automatically enters and exits the sample without the need for personnel to be on duty! 4. The instrument's backend automatically checks the important data of the instrument. If there are any abnormalities, the instrument will issue an abnormal prompt dialogue window to remind users in advance of any problems with the instrument. 5. Large screen LCD display, the instrument can be remotely upgraded through USB port. 6. The detection data can be queried and printed, making it extremely convenient to use. Technical parameters: Analysis range: 0.0100% to 100.0000%, select the measurement range by calibrating the working curve. Analysis accuracy: When detecting limestone, under normal working curve conditions, the standard deviation of S calcium is ≤ 0.15%, S iron is ≤ 0.05%, and S silicon is ≤ 0.07%. Analysis width: CaO: min~max ≤ 15%. Analysis time: n * 60 seconds (n is a natural number from 1 to 5). Usage conditions: Power supply AC 200V~240V; The ambient temperature ranges from 0 to 40 ℃; Relative humidity<85%. Whole machine power consumption:<30W. Overall dimensions: 380mm * 348mm * 180mm. Whole machine weight: 12kg.
Introduction: TRGT-1 automatic calcium iron silicon (magnesium) rapid analyzer, mainly used for limestone, can quickly measure the percentage content of calcium, iron, silicon, and (magnesium) in limestone, monitor the quality of incoming raw materials, and lay a solid foundation for the quality of subsequent deep processed products. It can also be used to detect the percentage content of total calcium, iron, and silicon in quicklime and hydrated lime. The calcium in quicklime includes calcium oxide (effective calcium) and calcium carbonate (ineffective calcium); Lime contains calcium hydroxide, calcium carbonate, and calcium oxide; Moreover, quicklime and hydrated lime are active and in contact with air and moisture, the chemical composition of calcium is constantly changing. As long as the user handles the sample properly, the data obtained for detecting quicklime and hydrated lime can be used as a reference.
