TRGF-8000A Fully Automatic Industrial Analyzer Introduction: The TRGF-8000A fully automatic industrial analyzer can be used for testing the moisture, ash content, and volatile matter of coal, coke, and other substances in related industries and departments such as coal, power, chemical, geological survey, quarantine inspection, scientific research, and universities, and calculating their fixed carbon, hydrogen content, and calorific value; Can analyze the carbon content of fly ash and slag; The loss on ignition of cement can be analyzed. characteristic: 1. Experimental process: The process is standardized and the results are accurate. The experimental process, conditions, and results for moisture, ash content, and volatile matter all meet the standard requirements and do not require calibration. They can be used for arbitration analysis. 2. Interface method: CAN bus technology is adopted, and shielding and protection circuit devices are used for lightning protection, anti magnetic interference, and anti stimulation interference. 3. Easy to operate: During the experiment, there is no need to remove or place crucible covers, send samples, or take samples, avoiding the risk of high temperature radiation and burns. 4. Control mode: bit machine control. The operation of the control host is not uncontrollable due to unilateral reasons caused by the computer. Fault alarm self-protection. 5. Analysis and testing system: It can connect to the majority of our company's coal quality analysis equipment. Automatically upload data and produce reports. Users can design reports according to their own needs. 6. The volatile component equipment adopts dual guide rail translation technology to ensure the docking between every two samples and the furnace. Using standard crucible preparation, no manual involvement, no need for nitrogen supply, volatile matter test arbitration method. 7. The structural design is simple and reasonable, without sliding rail translation devices such as "mechanical arms", so there will be no phenomenon of dropping or damaging the crucible during transportation. Technical parameters: Sample weight: 0.8-1.2 grams, particle size: ≤ 0.2mm Furnace temperature range: room temperature~1000 ℃; Temperature control accuracy: ± 1 ℃, temperature control points: moisture content 105-110 ℃, ash content 815 ± 10 ℃, volatile matter: 900 ± 10 ℃ Test time: 240 minutes/24 samples (12 water ash samples, 12 volatile matter samples). Voltage: 220 ± 22VAC, 50 ± 1HZ, Power: ＜ 5KW Accuracy: Complies with national standards Size mm: 660 * 450 * 820
Introduction: The TRGF-8000A fully automatic industrial analyzer can be used for testing the moisture, ash content, and volatile matter of coal, coke, and other substances in related industries and departments such as coal, power, chemical, geological survey, quarantine inspection, scientific research, and universities, and calculating their fixed carbon, hydrogen content, and calorific value; Can analyze the carbon content of fly ash and slag; The loss on ignition of cement can be analyzed.
