Introduction: It is suitable for the determination of water, ash and volatile matter of coal, coke or other organic matter in electric power, coal, metallurgy, petrochemical, environmental protection, cement, papermaking, geological prospecting and scientific research institutions. The fly ash, ash, coke and carbon content can be analyzed. Adopting the standard: GB / T212-2008 "Industrial analysis of coal". Features: 1, the test is accurate: moisture, ash, volatile hair of the test process, conditions and results are to meet the national standard requirements, to meet all the coal test requirements, no correction, can be used as arbitration analysis. 2, the test speed: the use of multi-furnace structure, with a constant temperature drying device, moisture, ash, volatile three indicators can be any combination of determination or separate determination, while testing the 12 samples of the three indicators can be within 150 minutes carry out. 3, a high degree of automation: RS485 field industrial control bus to achieve communication, high-precision imported electronic balance integrated into the instrument, combined with a set of pneumatic control of the automatic weighing mechanism, the use of thermogravimetric analysis, automatic weighing Sample, automatic processing of data, the results of calculation, report printing and storage, etc., by measuring moisture, ash, volatile points can automatically calculate the fixed carbon content, hydrogen and calorific value. 4, easy to operate, safe: the test process without taking the crucible cover, send samples and sampling, to avoid the risk of high temperature radiation and scalding. 5, cost-effective: a single test host in full accordance with the national standard to achieve industrial analysis of the three indicators of precision measurement, cost-effective, fully functional. 6, the dynamic to add samples: the test process can be temporarily added samples to adapt to the user to the uncertainty of the special circumstances. Technical Parameters: 1, the sample weight: 0.5 ~ 1.5g 2, the maximum operating temperature: 1000 ℃ 3, temperature control accuracy: ± 1 ℃ 4, the number of samples: water, ash, volatile at the same time to do 1 to 12, a single index of 1 to 24 5, test temperature: 105 ° C (moisture) 815 ° C (ash) 900 ° C (volatiles) 6, test time: 12 samples of three indicators test time ≤ 150 minutes 7, precision: in line with GB / T212-2001 standards 8, accuracy: within the allowable range of the standard sample 9, power: ≤ 4kW 10, power supply: (220 ± 22) VAC, (50 ± 1) Hz 11, the whole weight: 65Kg 12, Dimensions: 620X530X760mm
Introduction: It is suitable for the determination of water, ash and volatile matter of coal, coke or other organic matter in electric power, coal, metallurgy, petrochemical, environmental protection, cement, papermaking, geological prospecting and scientific research institutions. The fly ash, ash, coke and carbon content can be analyzed. Adopting the standard: GB / T212-2008 "Industrial analysis of coal".