TM-XD24D desktop rapid steam sterilizer Introduction: This sterilizer is a safe and reliable small desktop rapid steam sterilization equipment automatically controlled by a microcomputer program. It has a sterilization range of 103~134 ℃, a timing range of 1~99 minutes and 59 seconds, and a fully automatic computer operation function. Suitable for medical and health, pharmaceutical, scientific research and other units. Provide rapid sterilization for items that are resistant to saturated steam, such as surgical, dental, ophthalmic instruments, glassware, drugs, culture media, fabric dressings, and food. characteristic: 1. Sterilization process: a. Automatic injection of 1.2 liters of distilled water can continuously disinfect and sterilize 4-5 times, with a fast sterilization cycle. b. The operation is simple, and the microcomputer automatically controls the heating, sterilization, exhaust, and drying processes without supervision, making it easy to use. c. Temperature and time Nixie tube LED display window, full screen display program process dialogue and beep prompt. 2. Can be set: sterilization range 105~134 ℃, timing range 0-99 minutes. 3. High temperature: The sterilization process at 134 ℃ is suitable for quick sterilization for 4-6 minutes. 4. Equipped with a steam internal circulation system, which does not discharge steam outdoors, and the environment is clean and dry. 5. Equipped with automatic protection devices for over temperature and over pressure: d. When the internal pressure is greater than 0.24MPa, the safety valve automatically opens and the steam is discharged into the water tank. e. If the steam temperature in the inner cylinder exceeds 138 ℃, the power supply will be automatically cut off; f. When the temperature of the heating tube exceeds 150 ℃ during dehydration and overheating, the power supply will be automatically cut off and a water cut-off alarm will be given. g. Overcurrent protection: When the current is overloaded, the power circuit breaker automatically cuts off the power supply, 6. The cold air in the sterilization room is equipped with an automatic discharge device to ensure the sterilization effect. 7. With drying function 8. The sterilization room door has a protective cover to prevent operators from getting burned. 9. The inner container is made of stainless steel material SUS304/wall thickness ≥ 2.5mm, which is durable and durable. Technical parameters: Sterilization room volume: 24L (inner diameter? 250 × 520 mm) Rated working pressure: 0.22MPa Rated working temperature: 134 ℃ Sterilization temperature selection: 105~134 ℃ Timing time selection range: 0-99 minutes Thermal uniformity of sterilization room: ≤ ± 1 ℃ Power/power supply voltage: 1500W/AC220V 50Hz Stainless steel disinfection tray: 400 × two hundred × 30mm (3 pieces); Overall dimensions: 580 × four hundred and eighty × 384mm; Gross weight/net weight: 50Kg/45kg
Introduction: This sterilizer is a safe and reliable small desktop rapid steam sterilization equipment automatically controlled by a microcomputer program. It has a sterilization range of 103~134 ℃, a timing range of 1~99 minutes and 59 seconds, and a fully automatic computer operation function. Suitable for medical and health, pharmaceutical, scientific research and other units. Provide rapid sterilization for items that are resistant to saturated steam, such as surgical, dental, ophthalmic instruments, glassware, drugs, culture media, fabric dressings, and food.
