Sales TF-DHS type dissolution dryer，Manufacturer

Position: Home > > Lab general equipment > Heating / drying equipment > Fast drying apparatus > TF-DHS type dissolution dryer

TF-DHS type dissolution dryer

Product ID：SYJRGZksgz008

Price: Please inquire PDF Format

Supply Ability:80 SETS/MONTH

Port:SHENZHEN

Product Introduction
Consulting

Model NumberTF-DHS

Brand NameSHTF

Payment TermsT/T, paypal

Introduction:
The non-powered dissolving dryer is installed in order to remove the moisture in the air duct, and is provided with refined clean compressed air for the terminal gas equipment. The compressed air containing moisture enters the chemical reaction of the solvent from the low-end inlet of the pressure vessel. The shrinkage is discharged by gravity to the bottom of the pressure vessel and discharged through the sewage outlet. The layer of dissolved agent deposited by the compressed air in the pressure vessel is naturally upward, gradually absorbed by the solvent, and the dissolved agent itself is melted and discharged from the drain port in a liquid form. The purified clean compressed air after drying is discharged from the upper end air outlet of the pressure vessel, and the discharged compressed air does not pollute the environment and the equipment used. There is a sight glass at the height of the pressure vessel 2/3 (see the figure below). The dissolution rate of the solvent can be known by the sight glass. If no solvent is observed in the sight glass, it means that the solvent needs to be added and unscrewed. The filling port at the top of the container can be used, and the power supply is not used in the whole process, so it is an energy-saving and environmentally friendly product.
Features:
1. The non-powered dissolving dryer (machine) can absorb the moisture in the compressed air without providing power supply, and the operation and management of the product is simple and convenient.
2. Solve the problem of the original complex working principle according to the dehumidification principle, and design it into a dryer that anyone can manage.
3. The internal solvent volume can be confirmed by the sight glass on both sides of the tank, and no additional management is required except for the replenishment of the solvent 2 to 3 times a year.
4. Because the parts are used less, there is no maintenance cost, and it is more economical than the refrigerating dryer.
5. And it does not have the danger of cold freezing of the machine, it is the only air dryer that can be installed outdoors.
Technical Parameters:

Model	Processing capacity	Weight	Dimensions	Export	Initial volume	Annual dissolved agent consumption
Model	Nm³/min	Kg	LxWxH(mm)	Export	Kg	Annual dissolved agent consumption
TF-DHS-10	2.0	125	400X400X1260	G3/4	50	43
TF-DHS-20	3.0	130	540X500X1500	G3/4	75	72
TF-DHS-30	5.0	170	590X580X1620	G1	175	168
TF-DHS-50	8.0	200	690X660X1650	G11-2	225	216
TF-DHS-100	15	270	850X770X1770	G2	325	312
TF-DHS-125	20	300	960X770X1770	DN65	400	384
TF-DHS-180	25	360	1160X920X1880	DN65	525	512
TF-DHS-220	30	590	1030X1030X2320	DN80	625	600
TF-DHS-250	35	710	1230X1230X2400	DN100	800	760

Introduction:
The non-powered dissolving dryer is installed in order to remove the moisture in the air duct, and is provided with refined clean compressed air for the terminal gas equipment. The compressed air containing moisture enters the chemical reaction of the solvent from the low-end inlet of the pressure vessel. The shrinkage is discharged by gravity to the bottom of the pressure vessel and discharged through the sewage outlet. The layer of dissolved agent deposited by the compressed air in the pressure vessel is naturally upward, gradually absorbed by the solvent, and the dissolved agent itself is melted and discharged from the drain port in a liquid form. The purified clean compressed air after drying is discharged from the upper end air outlet of the pressure vessel, and the discharged compressed air does not pollute the environment and the equipment used. There is a sight glass at the height of the pressure vessel 2/3 (see the figure below). The dissolution rate of the solvent can be known by the sight glass. If no solvent is observed in the sight glass, it means that the solvent needs to be added and unscrewed. The filling port at the top of the container can be used, and the power supply is not used in the whole process, so it is an energy-saving and environmentally friendly product.