Introduction: It is mainly applicable to fast dehumidification and drying treatment of samples before coal powder in coal, electric power, metallurgy, chemical industry and other industries. Comply with the standard GB/T474-2008 "Preparation method of coal samples" Features: 1. The use of wind-through three-dimensional drying (hot air penetration of the sample layer) significantly improves the drying efficiency compared to conventional oven drying (see the table below), which also results in a significant reduction in user costs. 2. After the sample is dried, the air can be directly equilibrated in the equipment, and then it can be directly used for milling. Instead of following the traditional drying method, the sample plate is first taken out of the oven, and the sample is then amortized to reduce manual intervention. At the same time, the operation is more convenient. 3. Drying temperature is controlled from room temperature to 60°C. Users can set any temperature control point and drying time according to their requirements. The sample integrity and representativeness meet the requirements of the national standard. 4. It can be controlled by multiple machines. The operation of each drying unit will not affect each other and can be combined in any combination or individually according to the needs. Technical Parameters: Temperature control range: room temperature ~60°C (default setting is 40°C) Temperature control accuracy (°C): ±2.5 Temperature Control Resolution (°C): 1 Number of drying units (control): 3 Single controlled sample processing (g): 30~500 Overall dimensions (mm): 693*414*1470 Maximum power (kW): 1 Supply Voltage (V): 220
Introduction: It is mainly applicable to fast dehumidification and drying treatment of samples before coal powder in coal, electric power, metallurgy, chemical industry and other industries. Comply with the standard GB/T474-2008 "Preparation method of coal samples"
