Brief introduction: TDS-3410A Desorption Tubes Activation Divice solution straw activation device and the prototype (such as benzene content TVOC) simulation sampling design, work individually, simple and practical, high work efficiency. TDS - 3410 - a type of multi-functional straw activation device solution straw activation and the prototype simulation sampling is mainly composed of: solution straw activation treatment parts, prototype simulation sampling parts, constant temperature oven, controller and timer of five parts, matching different parts can be used according to the purpose. Features: 1. The solution straw activation device and integrated design, prototype simulation sampling multi-usage, greatly improve the performance of this device and the operation cost; 2. The simulation of sampling gas prototype (room temperature), or to be and is suitable for liquid sample (heating temperature); 3. Can also activate 6-10 he straws; 4. The device is equipped with deep gas purifier, can make the prototype simulation sampling purging gas to minimize interference; 5. The solution straw activation and the prototype simulation sampling can be automatically run regularly. Technical indicators: 1, the constant temperature furnace: Temperature control range: at room temperature to 400 ℃, with increment 1 ℃ set; Temperature control precision: plus or minus 0.5% 2, activation (renewable) or analog sampling purging nitrogen flow: 0 ~ 200 ml/min continuous adjustable; 3, pyrolysis straw size: foreign economic Ф 6 (or 1/4 inch), unlimited length; 4, timing control: 0 ~ 655 minutes continuous adjustable; 5, the consumed power: < 500 w 6, appearance size: 170 * 390 * 390 mm3 7, weight: about 8 kg
Brief introduction: TDS-3410A Desorption Tubes Activation Divice solution straw activation device and the prototype (such as benzene content TVOC) simulation sampling design, work individually, simple and practical, high work efficiency. TDS - 3410 - a type of multi-functional straw activation device solution straw activation and the prototype simulation sampling is mainly composed of: solution straw activation treatment parts, prototype simulation sampling parts, constant temperature oven, controller and timer of five parts, matching different parts can be used according to the purpose.
