Introduction: The double cone rotary vacuum dryer is a new type of dryer for mixing and drying. The condenser, vacuum pump and dryer supporting the composition of a vacuum drying device. (Such as the need to recycle solvent, the condenser may not) The machine design is advanced, the internal structure is simple, easy to clean, the material can be discharged, easy to operate, can reduce the labor intensity to improve the working environment. At the same time because the container itself when the rotation is also rotating but the wall is not accumulated material, so the heat transfer coefficient is high, the drying rate is large, not only save energy, and the material is dry and uniform, good quality. Can be widely used in pharmaceutical, chemical, food, dyes and other industries dry materials. Meet GMP requirements. Features: 1, double cone rotary vacuum drying mixer without dead ends, easy to operate, easy to clean, optimized design of the sealing method, the sealing effect is better, easy maintenance, in line with pharmaceutical production GMP standards; 2, double cone rotary vacuum drying mixer inside and outside all stainless steel, rust and corrosion. Containing halogen material can be enamel liner; 3, double cone rotary vacuum drying mixer for vacuum drying, low temperature fast, constant mixing, tank rotation speed can be adjusted within the range of 3-12rpm. Dry uniform, good airtight cylinder, double mechanical seal, seal for the PTFE material, safe and reliable, and for heat-sensitive materials; 4, double cone rotary vacuum drying mixer cleanliness of more than 100, no gas volatile leakage; 5, double cone rotary vacuum drying mixer energy consumption is only about 50% of ordinary drying equipment, the final moisture content of dry materials can be flexible control; 6, the tank constantly rotating, the material heating surface to be updated. Indirect heating, to avoid the material pollution, heat source has high temperature of the heat transfer oil, the temperature of the steam and low temperature hot water; 7, double cone rotary vacuum drying mixer high degree of automation, temperature control, temperature display by the digital display. Simple operation, and can continue to produce. Technical indicators: Product Type: SZG-50 Volume (L): 50 Maximum charge volume (L): 20 Maximum charge weight (Kg): 12.5 Heating area (㎡): 0.8 Motor power (kW)): 0.75 Dimensions (mm) (L x W x H): 1760x600x1455 Machine weight (Kg)): 550
Introduction: The double cone rotary vacuum dryer is a new type of dryer for mixing and drying. The condenser, vacuum pump and dryer supporting the composition of a vacuum drying device. (Such as the need to recycle solvent, the condenser may not) The machine design is advanced, the internal structure is simple, easy to clean, the material can be discharged, easy to operate, can reduce the labor intensity to improve the working environment. At the same time because the container itself when the rotation is also rotating but the wall is not accumulated material, so the heat transfer coefficient is high, the drying rate is large, not only save energy, and the material is dry and uniform, good quality. Can be widely used in pharmaceutical, chemical, food, dyes and other industries dry materials. Meet GMP requirements.
