Introduction: SZC-101 automatic fat analyzer adopts fully-closed electric heating, and the temperature can be adjusted at room temperature to 280°C Features: 1 using fully enclosed electric heating, the temperature is adjusted at room temperature ~ 280 °C; 2. Using a 2.5-inch blue-screen LCD display, display the set temperature and actual temperature at the same time, the holding time countdown display, alarm at the time; 3. The solvent is automatically recovered and stored; 4. No plug design: avoid leakage and glass tube damage caused by frequent rotation of the cock, effectively improving the sealing performance and service life; 5. Limit temperature protection: can set the upper temperature limit, when the actual temperature exceeds the upper limit, the instrument automatically alarm and stop heating; 6. Automatic 6-stage warming: 6 consecutive stages of temperature and holding time can be set, and the instrument will be automatically completed in sequence. 7. Drying function: no need to transfer the sample to the oven, it can be directly dried on the instrument; Technical Parameters: Measurement range: samples with crude fat content ≥ 0.1%; Test quantity: 6/batch; Solvent recovery rate: ≥80%; Solvent recovery method: automatic recovery and storage; Accuracy: relative difference ≤ 3%, parallel difference ≤ 0.3%; Recovery rate: ≥99% (backflow 120 drops/minute, cooling water temperature ≤ 30°C); Heating method: fully enclosed aluminum alloy electric heating plate; Sealing method: PTFE seal; Display mode: 2.5-inch blue-screen LCD; keep time countdown; Other functions: 6-stage heating, sample drying; Temperature control range: room temperature ~ 280 °C (arbitrary adjustment); Temperature control accuracy: ±0.3°C; Power supply: 220(V)±10%, 50~60HZ; Power: 500W; Dimensions: 560 × 370 × 685 (mm); Weight: 32kg;
Introduction: SZC-101 automatic fat analyzer adopts fully-closed electric heating, and the temperature can be adjusted at room temperature to 280°C
