Introduction: Product sulfur content determination method (X-ray spectrometry) according to the standard: GB / T17040, ASTM D4294 determination of trace sulfur content of petroleum products. Because of its physical analysis method, it has the characteristics of fast analysis speed, no complicated sample pretreatment, high precision, low human error, low labor intensity and no pollution, so it has been widely used in the world and basically replaced other sulfur Analysis method. Features: Rapid analysis, usually within two hundred seconds automatically give the content of the results; Automatic C / H ratio correction, suitable for a variety of samples; Using X-ray tube excitation, so that the instrument can be long-term use, without the impact of source attenuation; Intelligent measurement and control system, the instrument to large - screen LCD display; Operation using the Chinese menu, easy to operate. The printer can print measurement data; Using physical analysis methods, analysis does not contact, do not destroy the sample, without chemical reagents; Instrument with integrated design, a high degree of integration, good reliability, easy maintenance; Environmental adaptability, long-term stability is good; Low price function, suitable for China's national conditions; No waste pollution, radiation protection is safe and reliable. Technical indicators: Analysis range: S analysis range can be adjusted by selecting the working curve of the selected method; Analysis range width: S% max-S% min ≤ 5%; For example, oil: S: 0.002 to 5%. Inherent error, analysis accuracy: System analysis time: 1 ~ 999 seconds, the recommended value is 60 seconds; Detection limit: 20ppm; Conditions of use: Ambient temperature: 5 ~ 35 ℃, relative humidity: 40% -85% (30 ℃), power supply: 220V ± 20V, 50 ± 1Hz; Power consumption: <150W; Size and weight: length × width × height: 560 × 470 × 150mm; weight: 20Kg.
Introduction: Product sulfur content determination method (X-ray spectrometry) according to the standard: GB / T17040, ASTM D4294 determination of trace sulfur content of petroleum products. Because of its physical analysis method, it has the characteristics of fast analysis speed, no complicated sample pretreatment, high precision, low human error, low labor intensity and no pollution, so it has been widely used in the world and basically replaced other sulfur Analysis method.
