Introduction: This instrument is used to determine the sulfur content of petroleum products, lubricating oil, crude oil, coke and residual oil. The instrument is designed and manufactured according to the national standard GB / T8017 ASTM D323 and is suitable for the determination of vapor pressure of gasoline, volatile crude oil and other volatile petroleum products. Can not be used to determine the vapor pressure of liquefied petroleum gas. The system consists of a heated water bath, three automatic rotation of the vapor pressure and control box and other components. The instrument is controlled by the microcontroller, with automatic testing, color display, automatic diagnosis, the results of inquiries, printing and other functions. Technical Parameters; Power supply: AC 220V ± 10%. Instrument power consumption: ≤ 1100W Experimental bomb: can be three samples at the same time, the upper and lower chamber volume ratio: 4: 1. Water bath temperature: 37.8 ℃. Heating power: 1000W. Agitation angle: 350 degrees. Pressure gauge range: 0 ~ 0.16Mpa
Introduction: This instrument is used to determine the sulfur content of petroleum products, lubricating oil, crude oil, coke and residual oil. The instrument is designed and manufactured according to the national standard GB / T8017 ASTM D323 and is suitable for the determination of vapor pressure of gasoline, volatile crude oil and other volatile petroleum products. Can not be used to determine the vapor pressure of liquefied petroleum gas. The system consists of a heated water bath, three automatic rotation of the vapor pressure and control box and other components. The instrument is controlled by the microcontroller, with automatic testing, color display, automatic diagnosis, the results of inquiries, printing and other functions.
