Introduction: The instrument is designed and manufactured in accordance with the requirements of the People's Republic of China Standard GB / T5096 "Test Method for Corrosion of Copper Products for Petroleum Products" and is applicable to the aviation, petrol, aviation fuel, , Agricultural tractor fuel, washing solvents, kerosene distillate fuels and lubricants and other petroleum products on the degree of corrosion of copper. Features: 1, the use of digital temperature controller, heater, electric mixer composed of constant temperature bath, bath temperature uniformity; with a timer for the test when the test set and automatic timing, when the alarm will be prompted. 2, the instrument has four sample test holes, each hole can be placed a test bomb or placed three test tubes at the same time test, the test efficiency is high. 3, with the United States imported standard color swatch, to meet the requirements of the test comparison. Technical Parameters: 1, the power supply voltage: 220V ± 10%, 50Hz; 2, the temperature sensor: industrial platinum resistance, the sub-degree of Pt100; 3, temperature range: room temperature ~ 100 ℃ arbitrary set; 4, temperature control accuracy: ± 1 ℃; 5, the temperature display: LED digital display; 6, temperature control heating power: 600W; 7, auxiliary heating power: 1000W; 8, control time range: 1 minute to 24 hours any set; 9, time display: LED digital display; 10, Sheng hole: 4; 11, the number of samples measured: 4 to 12; 12, ambient temperature: room temperature ~ 35 ℃; 13, relative humidity: ≤ 85%; 14, the whole power consumption: not more than 1800W.
Introduction: The instrument is designed and manufactured in accordance with the requirements of the People's Republic of China Standard GB / T5096 "Test Method for Corrosion of Copper Products for Petroleum Products" and is applicable to the aviation, petrol, aviation fuel, , Agricultural tractor fuel, washing solvents, kerosene distillate fuels and lubricants and other petroleum products on the degree of corrosion of copper.
