- Model NumberSYD-2801F
- Brand NameSHQGYQ
- Payment TermsT/T, paypal
Brief introduction:
SYD-2801F low temperature penetration tester is designed and manufactured according to the technical requirements and relevant regulations in t0604-2011 asphalt penetration test for highway engineering and asphalt mixture test code JTGE20-2011, which is the traffic industry standard of the People's Republic of China. This instrument can also be used for testing the penetration degree of solid fine grain, powder, colloid, frozen body and other materials, as well as food raw materials such as cheese, sugar gum, butter, macchiato, cream and fermented body at low temperature. It can be widely used in food industry, traffic highway engineering and other industrial departments. The biggest characteristic of the instrument is: equipped with low temperature constant temperature water bath, can meet the needs of low temperature test; Advanced mechanical design, easy to adjust; Digital temperature control meter, accurate temperature control; High precision needle penetration digital test table, the measurement results are reliable.
Main functional features:
1. The needle entry meter adopts digital display, thermostatic water bath and 2-level needle entry control device.
2. Special low-temperature circulating constant temperature water bath provides circulating constant temperature water to the glass container on the work platform of the penetrometer to create a preset and constant low-temperature environment required by the tested samples.
3. Standard needles, sample dishes, thermometers and weights are available for GB/T 4509-1998 and GB/T 4509-2010.
Main technical parameters:
- Constant temperature water bath parameters:
- Power supply: AC (20 ±10%) VX 50 Hz.
- Bath volume: 5.5 L.
- Temperature range: (5.0 ~ 100.0) ℃.
- The accuracy of constant temperature is ±0.1 ℃.
- Recycling water: 5L / min.
- Pump head: 1 m.
- Power consumption: no more than 1800W.
- Shape size: 420mm × 380mm × 900mm (length × width × high).
2, the parameters of the penetration meter are as follows:
- Needle timing control device: 5 seconds, 60 seconds, the time error is less than ±0.1 seconds.
- Needle depth device: high-precision digital display, easy to use, fast, intuitive, can be started in any position.
- Resolution: 0.01,
- Injection accuracy: ±1 penetration.
- Maximum penetration depth: 600 needle penetration.
- Standard needle: 50g, 2.5g ±0.05g (basic configuration).
- Shape size: 280mm × 350mm × 700mm (length × width × high).
