SW-30 horizontal impact table Introduction: The SW-30 horizontal impact table performs the impact test of the product in the horizontal direction. It is mainly used for simulation of impact environment such as non-inverted photovoltaic system and horizontal emission test of slender products. Characteristics 1. The impact table adopts longitudinal impact, has high rigidity in the longitudinal direction, and high frequency clutter is small; 2. Reliable pneumatic brake technology prevents secondary rebound of the workbench; 3. All use low-pressure cylinders as power, safe and reliable, easy to maintain; 4. For the large horizontal impact table, the gas-liquid buffer device is designed, which greatly reduces the impact force on the base and the ground and improves the service life of the equipment. 5. Using the expansion cylinder as the power, the impact overload value is controlled by adjusting the air pressure, which is quick and convenient, and the impact repeatability is good; 6. Impact table control and measurement integration, easy to operate and measure. Technical Parameters: Model: SW30-50 Rated load (kg): 50 Table size (mm): 600×320 Shock waveform: 100 ~ 6000 Peak acceleration: (m/s2) 60~0.5 Pulse duration: (ms) 18~3 Half sine wave: 18~6 After peak sawtooth: 100～2000 Trapezoid: 150~1000 Base size (mm): 2200×630 Table weight (kg): 1500 Power supply voltage: three-phase 380V, 50/60Hz Standard of use: GJB150 GJB360 GJB548 GB/T2423 GJB1217 JJG497 MIL-STD-810F IEC68-2-27
Introduction: The SW-30 horizontal impact table performs the impact test of the product in the horizontal direction. It is mainly used for simulation of impact environment such as non-inverted photovoltaic system and horizontal emission test of slender products.
