Features 1．The use of advanced high-speed DSP image processing technology, the use of imported chips, exclusive research and development of innovative algorithms, rapid and accurate control of automatic light detector to complete the headlight high beam, low beam of the parameters of the test. 2.Double imported CCD camera for image acquisition, the use of international advanced CCD image processing technology to find light, testing. Can detect a variety of vehicle light source, from the special light-type and external ambient light effects and restrictions, to avoid the traditional photosensitive cells poor accuracy, light type is subject to environmental interference and other issues. 3.For complex conditions, in particular, new hardware limit protection, power outage protection equipment in case of uncontrolled software control to avoid accidents. 4.streamline design, simplify the structure, light box sealed technology, dust and pollution prevention, reduce post-maintenance and equipment failure rate. 5.The base is equipped with two reversible inverters with imported inverters to ensure the accurate and quick operation of the equipment for a long time, prolong the service life of the complete equipment and reduce the equipment failure rate as a whole. 6.built-in software and efficient detection efficiency to improve the single light far / near light detection takes an average of more than 20 seconds, the distance with the light about 40 seconds, to meet the detection of line-like customers to improve the efficiency of the inspection requirements. Technical Parameters: 1. Environmental conditions Ambient temperature: -0 ℃ ~ 40 ℃ Relative humidity: 20% ~ 85% Power supply voltage: AC220V ± 10%, 50 ± 1Hz 2. Measuring range A, luminous intensity: 0 ~ 120000 cd B, optical axis offset: High beam: vertical direction: on the 35cm / 10m ~ under 52.5cm / 10m Horizontal direction: left 52.5cm / 10m ~ right 52.5cm / 10m Low beam: Vertical direction: Upper 35 cm / 10 m ~ Lower 52.5 cm / 10 m Horizontal direction: left 52.5 cm / 10m ~ right 52.5 cm / 10m 3. Indication error A, luminous intensity: ± 10% B, the optical axis offset: ± 35mm / dam or ± 10 ' C, optical box center height: ± 1cm 4, measuring distance: 1 meter 5, rail length: 5 meters (according to the actual adjustment) 6, power consumption: 260 watts
Features 1．The use of advanced high-speed DSP image processing technology, the use of imported chips, exclusive research and development of innovative algorithms, rapid and accurate control of automatic light detector to complete the headlight high beam, low beam of the parameters of the test. 2.Double imported CCD camera for image acquisition, the use of international advanced CCD image processing technology to find light, testing. Can detect a variety of vehicle light source, from the special light-type and external ambient light effects and restrictions, to avoid the traditional photosensitive cells poor accuracy, light type is subject to environmental interference and other issues. 3.For complex conditions, in particular, new hardware limit protection, power outage protection equipment in case of uncontrolled software control to avoid accidents. 4.streamline design, simplify the structure, light box sealed technology, dust and pollution prevention, reduce post-maintenance and equipment failure rate. 5.The base is equipped with two reversible inverters with imported inverters to ensure the accurate and quick operation of the equipment for a long time, prolong the service life of the complete equipment and reduce the equipment failure rate as a whole. 6.built-in software and efficient detection efficiency to improve the single light far / near light detection takes an average of more than 20 seconds, the distance with the light about 40 seconds, to meet the detection of line-like customers to improve the efficiency of the inspection requirements.
