Introduction: The instrument adopts full computer control, electronic photoelectric automatic measurement, 5-inch touch screen display, adjustable heating rate. Comply with but not limited to the following national standards: GB∕T 4507-2014 Determination of asphalt softening point Global method T0606-2000 asphalt softening point test (ring and ball method) Features: 1: Intelligent software has strong temperature stability, PID can automatically adjust the optimal parameters according to different media, and special users can manually re-adjust parameters. 2: Infrared scanning detection, fully automatic control, adjustable speed automatic mixing. 3: Two-stage heating rate adjustable Technical Parameters: Model: SPT-A1 Power supply voltage: 220V, 50HZ Temperature control range: room temperature ~ 200 ° C (or higher) Heating rate: 0.1 °C / min - 50 ° C / min, any adjustable Resolution: 0.1 ° C Timing accuracy: 0.1 second Control method: infrared scanning detection, electronic photoelectric automatic measurement, automatic control, automatic calculation Mixer: continuous adjustment of stirring rate, adjustable speed Display mode: 5-inch color touch screen Number of tests: two samples can be tested in a single test Power: 600W
Introduction: The instrument adopts full computer control, electronic photoelectric automatic measurement, 5-inch touch screen display, adjustable heating rate. Comply with but not limited to the following national standards: GB∕T 4507-2014 Determination of asphalt softening point Global method T0606-2000 asphalt softening point test (ring and ball method)
