Introduction: SLQ-6A crude fiber tester is based on the principle of acid-base washing method, set acid, alkali treatment and washing in one, the use of fully enclosed electric heating, adding liquid, digestion, filtration, washing method to determine the crude fiber content. The sample does not need to be transferred during operation, and the crude fiber in the material can be decomposed, and the temperature can be adjusted individually and individually according to the required temperature so as to achieve accurate and rapid purpose. SLQ-6A crude fiber tester for food, feed, food and other agricultural and sideline products of crude fiber, lignin, cellulose and hemicellulose content determination. Features: 1. The use of high-pressure pressurized infusion, add liquid quick and clear, to solve the self-flow dosing problem is not smooth 2. Reagent preheating furnace automatic control, safe and efficient power saving, prevent dry burn 3. The real vacuum filtration, high-performance corrosion-resistant parts 4. Split design, reagent containers placed on the table, add liquid convenient. For the previous structure on the top of the instrument, to solve the small problem of dosing difficult, more humane Technical Parameters: 1. Test range: 0 ~ 100%; 2. The number of samples: one can test 1 to 6 samples at a time; 3 sample weighing: 0.5 ~ 3.0g; 4. Test accuracy: repeatability ≤ 0.4%; 5. Test time: ≤ 90min; 6. Heating method: semi-circular silicon carbide heating, a single temperature control; 7. Sealing method: upper and lower tetrafluoroethylene isolation; 8. Dosing method: pressure injection type; 9. Reagent heating: automatic thermostat adjustable, over-temperature protection; 10. Anticorrosion capacity: Acid and alkali acetone, etc .; 11. Power: 220V ± 10%; 50 ~ 60HZ; 12. Rated power: 2700W; 13. Overall dimensions: 560 × 660 × 460 (mm); 14. Weight: 45kg;
Introduction: SLQ-6A crude fiber tester is based on the principle of acid-base washing method, set acid, alkali treatment and washing in one, the use of fully enclosed electric heating, adding liquid, digestion, filtration, washing method to determine the crude fiber content. The sample does not need to be transferred during operation, and the crude fiber in the material can be decomposed, and the temperature can be adjusted individually and individually according to the required temperature so as to achieve accurate and rapid purpose. SLQ-6A crude fiber tester for food, feed, food and other agricultural and sideline products of crude fiber, lignin, cellulose and hemicellulose content determination.
