Introduction: SKY3012-I automatic lubricating oil oxidation stability tester (rotary oxygen bomb method) is in accordance with ASTM D2272 and ASTM D2112 the latest standards of the technical requirements of the production of automatic testing equipment for petroleum products. This instrument is suitable for the determination of oxidative stability of new and used turbine oils with the same composition (base oils and additives). It can also be used to evaluate the new mineral insulating oil containing 2,6-di-tert-butyl-p-cresol as a rapid assessment method for its oxidation stability. Does not apply with 40 ℃ viscosity greater than 12mm2 / s containing antioxidant insulation oil. Features: 1. 8-inch color touch screen, beautiful interface, simple operation 2. In line with the latest ASTM D2272-10 standard metal bath structure design, replace the traditional oil bath structure, without expensive silicone oil medium, 3. No heating fumes, no transmission noise, no heavy body, no need to test after the complex cleaning, desktop structure design, The instrument is small and does not require a fume hood 4. Automatic constant temperature, automatic charge and discharge oxygen, automatically determine the leak, automatically record the test data and real-time curve display, automatically determine the test inflection point, automatic end of the test 5. Equipped with precision pressure gauge calibration device, at any time to correct the system pressure 6. Configure the dedicated temperature correction device to ensure accurate measurement system 7. Patented magnetic stirring structure, to ensure smooth rotation, do not turn off 8. Motor, solenoid valve, pressure sensors and other key devices are imported, high reliability 9. Over-temperature protection design, more than set the temperature automatically power off protection 10. Configure the cleaning gadget, easy to operate and safe 11. Configuration of small copper wire winding machine to facilitate the preparation of the test 12. You can store 6 test results, each result can contain two bomb 80 hours of data 13. The instrument can run reliably for 80 hours 14. RS232 interface, can be connected to laboratory LIMS system Technical indicators: Power supply: AC220V + 10%, 50 / 60Hz Machine power: ≤ 1700W Instrument size: 310mm * 600mm * 420mm (width * deep * high) Weight: 60Kg Constant temperature point: 150.0 ± 0.1 ℃; 140.0 ± 0.1 ℃ Test time: <80 hours Number of oxygen bombs: 2 only Rotating motor: 100 ± 5r / min Pressure sensor: 0 ~ 1.6MPa; Accuracy 0.1% Precision pressure gauge: 0 ~ 1.6MPa; 0.25 level Printer: Panel, Thermal
Introduction: SKY3012-I automatic lubricating oil oxidation stability tester (rotary oxygen bomb method) is in accordance with ASTM D2272 and ASTM D2112 the latest standards of the technical requirements of the production of automatic testing equipment for petroleum products. This instrument is suitable for the determination of oxidative stability of new and used turbine oils with the same composition (base oils and additives). It can also be used to evaluate the new mineral insulating oil containing 2,6-di-tert-butyl-p-cresol as a rapid assessment method for its oxidation stability. Does not apply with 40 ℃ viscosity greater than 12mm2 / s containing antioxidant insulation oil.
