Introduction: The whole machine of the SH-3C suction filter is designed to be acid and alkali resistant and corrosion resistant. Each sample is equipped with a separate valve control. It can filter one sample separately or filter 3 samples at the same time, which is suitable for all types of water sample filtration. Features: 1. Made of ABS material, durable, reducing expenditure 2. The whole machine is designed to be acid and alkali resistant and corrosion resistant 3. Each sample is equipped with a separate valve control, which can filter one sample separately or filter 3 samples at the same time 4. Suitable for all types of water sample filtration work 5. Large filtration capacity, each filter cup can filter 200 ml sample at a time 6. The diameter of the filter membrane used in this filter is optional 47/50mm 7. The filter system is equipped with an overflow protection device to prevent misoperation from causing waste liquid to flow into the vacuum pump 8. The vacuum pump adopts an electromagnetic motor, the piston linearly reciprocates to produce compressed gas, and the exhaust volume is large 9. The whole machine has no oil lubrication design, no need to add any lubricating oil 10. Small working current, easy to use 11. High-quality aluminum alloy casing of vacuum pump, rapid heat dissipation 12. Low noise work, working noise is less than 50DB 13. Stable performance, can work uninterrupted for 24 hours technical parameter: Maximum displacement: 30L/min Liquid collection bottle: PC material Membrane diameter: 50mm Effective suction area: 83cm² Maximum pressure: 0.035MP Number of suction holes: 3 holes Capacity of suction cup: 200mL Rated power supply: 220V/50Hz
Introduction: The whole machine of the SH-3C suction filter is designed to be acid and alkali resistant and corrosion resistant. Each sample is equipped with a separate valve control. It can filter one sample separately or filter 3 samples at the same time, which is suitable for all types of water sample filtration.
