Introduction: Sdtga8000 industrial analyzer is suitable for: Determination of moisture, ash and volatile matter of coal, coke and solid biomass fuel, calculation of its fixed carbon and calorific value; analysis of carbon content of fly ash and ash residue; analysis of loss on ignition of cement; analysis of moisture, ash and volatile matter of petroleum coke after forging. It conforms to the standard GB / 212-2008 industrial analyzer of coal (GB / T 30732-2014) industrial analysis method of coal (astm-d5142-2009) industrial analysis method of coal and coke -- Instrumental method characteristic: 1. The test data are accurate and conform to the national standard. The two electronic balance in the instrument is independent of the high temperature system, far away from thermal radiation and no drift. The initial value and process data of the sample quality are accurate from the physical structure, which fully meets the requirements of the national standard; The built-in two electronic balance has automatic calibration function, which can ensure the accuracy and reliability of each weighing result; The unique automatic dust removal function on the surface of low temperature disc completely eliminates the influence of dust deposition on the result weighing. 2. Parallel analysis, fast test speed and high efficiency. The new working mode of multi furnace structure, original parallel analysis of moisture, ash or volatile matter (continuous analysis can also be carried out), the test does not need to place blank crucible, and the working efficiency is increased by more than 30%; For any single index test, the unique continuous pipeline operation mode can be realized. 3. Stable and reliable operation. The imported guide rail transmission mechanism greatly improves the stability of the instrument operation; The original infrared positioning mode of sample disk can effectively ensure the accurate positioning of sample disk, stable and reliable operation. 4. Humanized design, energy saving and environmental protection. The experimental personnel only need to weigh the sample and loft, and other operations are automatically completed by the instrument, so the operation is more simple; The special crucible collector can automatically drop the sample, and there is no need to clamp the crucible in the high temperature zone, so the operation is safe; The maximum power is only 50% of the general industrial analyzer, which is more energy-saving; Equipped with enhanced smoke and dust collection device to realize the complete collection of smoke and dust of combustion furnace, healthy and environmental protection. Technical parameters: Sample mass: 0.5g ~ 1.1g (customizable) Furnace temperature range: room temperature ~ 1000 ℃ Temperature control accuracy: ± 2 ℃ (moisture), ± 2.5 ℃ (ash, volatile matter) Number of samples: 18 Test time: 1 working day (8 hours) can complete 3 batches of 54 samples of industrial analysis full index analysis Maximum power: 4.5kw Power supply voltage: 220 V ± 10%, 50 / 60 Hz
Introduction: SDTGA8000 industrial analyzer is suitable for: Determination of moisture, ash and volatile matter of coal, coke and solid biomass fuel, calculation of its fixed carbon and calorific value; analysis of carbon content of fly ash and ash residue; analysis of loss on ignition of cement; analysis of moisture, ash and volatile matter of petroleum coke after forging. It conforms to the standard GB / 212-2008 industrial analyzer of coal (GB / T 30732-2014) industrial analysis method of coal (astm-d5142-2009) industrial analysis method of coal and coke -- Instrumental method
