SDTGA1200 Industrial Analyzer Introduction: Scope of application of SDTGA1200 industrial analyzer: 1. Detection of moisture, ash, and volatile matter in coal, coke, and solid biomass fuels, as well as calculation of fixed carbon; 2. Carbon content analysis of fly ash and ash residue; 3. Analysis of cement loss on ignition 4. Analysis of moisture, ash, and volatile matter of petroleum coke after forging. Compliant with standards GB/T212-2008 "Industrial Analysis Methods for Coal" GB/T 30732-2014 "Industrial Analysis Methods of Coal - Instrumental Method" ASTM-D5142-2009 "Industrial Analysis Methods for Coal and Coke Analysis Samples - Instrumental Method" Features: 1. Dual furnace structure, dual built-in scales, precise testing and high efficiency. 2. Balance protection design to prevent coal samples from falling into the balance and reduce the frequency of balance cleaning. 3. Automatic dust recovery and burning treatment, reducing laboratory environmental pollution. 4. The overall thermal design ensures that the balance does not drift, the moisture testing environment is more stable, and the experimental results are more accurate. 5. The new automatic sample disposal mechanism can prevent damage to the crucible during sample disposal. Technical parameters: Sample mass: 0.5g~1.1g (customizable) Furnace temperature range: room temperature~1000 ℃ Number of samples: 18 Temperature control accuracy: ± 2 ℃ (moisture), ± 2.5 ℃ (ash and volatile matter) Maximum power: 4.5kW Power supply voltage: 220V ± 10%, 50/60Hz Test time: Within 1 working day (8 hours), complete industrial analysis of 3 batches of 54 samples with full indicator analysis
Introduction: Scope of application of SDTGA1200 industrial analyzer: 1. Detection of moisture, ash, and volatile matter in coal, coke, and solid biomass fuels, as well as calculation of fixed carbon; 2. Carbon content analysis of fly ash and ash residue; 3. Analysis of cement loss on ignition 4. Analysis of moisture, ash, and volatile matter of petroleum coke after forging. Compliant with standards GB/T212-2008 "Industrial Analysis Methods for Coal" GB/T 30732-2014 "Industrial Analysis Methods of Coal - Instrumental Method" ASTM-D5142-2009 "Industrial Analysis Methods for Coal and Coke Analysis Samples - Instrumental Method"
