SDT600-2 online concentration, density meter Introduction: The SDT600-2 online concentration/density meter is based on the principle of special law under the action of Coriolis force in moving liquid. The Coriolis force has a correlation with the density of the liquid, thus measuring the density value of the liquid. The concentration is calculated according to density and temperature; this principle has high stability, high precision, good long-term stability, and no drift from the sensor; it can be widely used in the petrochemical industry for refining, oil adjustment, food industry. In the sugar industry, vegetable oil and beverage processing and other production sites, paper industry, chemical industry, the measurement of weak acid and alkali solutions, wine, salt, printing and dyeing industries. Due to the large flow pipe, it is especially suitable for occasions where it is not dry or sticky; it is suitable for pipe installation. Features: 1. 4-wire transmitter with integrated structure, no moving parts are easy to maintain 2, five-digit density value real-time display, four decimal places (concentration 1 bit), real-time indication of current and temperature 3, can directly enter the instrument menu to set parameters 4, easy to install and use, the flange surface contact liquid can display the reading. 5, used in fluid liquid, suitable for pipeline installation 6, density and concentration with pure water calibration calibration, measured value fine-tuning and temperature compensation function 7, continuous online measurement without process interruption, can be directly used in production process control. 8. The contact liquid parts are all 316 stainless steel materials, which are safe, hygienic and have good corrosion resistance. Technical Parameters: Output signal: 4~20mA Power source: 24VDC (external resistance element cannot be loaded) Density range: 0~3g/ml; concentration range: 0-100% Accuracy: Density: 0.002 g/ml, Resolution: 0.0001, Repeatability: 0.0005 Concentration: 0.5%, resolution: 0.1, repeatability: 0.2 Explosion-proof grade: Explosion-proof ExdII BT4 Working pressure: <1Mpa Medium temperature: 0~60°C (liquid) Ambient temperature: -40~85°C Medium viscosity: <1500mpa•s Electrical interface: M20X1.5 Process interface: DN20~80 flange Liquid contact parts: 316 stainless steel, titanium
Introduction: The SDT600-2 online concentration/density meter is based on the principle of special law under the action of Coriolis force in moving liquid. The Coriolis force has a correlation with the density of the liquid, thus measuring the density value of the liquid. The concentration is calculated according to density and temperature; this principle has high stability, high precision, good long-term stability, and no drift from the sensor; it can be widely used in the petrochemical industry for refining, oil adjustment, food industry. In the sugar industry, vegetable oil and beverage processing and other production sites, paper industry, chemical industry, the measurement of weak acid and alkali solutions, wine, salt, printing and dyeing industries. Due to the large flow pipe, it is especially suitable for occasions where it is not dry or sticky; it is suitable for pipe installation.
