SD300 Photovoltaic Power Station Environmental Monitoring System
Introduction: SD300 series photovoltaic power station environmental monitoring system is an outdoor use, fully automatic environmental monitoring system. It can collect parameters such as ambient temperature, atmospheric relative humidity, photovoltaic module temperature, wind speed, wind direction, atmospheric pressure, rainfall, total solar radiation, solar scattered radiation, and direct solar radiation. It can meet the monitoring needs of photovoltaic power stations for surrounding environmental data. The main sensors, core collectors and supporting software used in the system are independently developed and produced by our company, so the whole system has good compatibility and consistency, and can meet various system working modes required by different tasks. The overall design of modular structure, through different configurations of software and hardware, and matching with different communication carriers, can be used as a wired telemetry station and a fully automatic unmanned station. Features: 1. High integration, easy installation and maintenance; 2. The collector and core sensor are all self-developed products, and the data measurement accuracy is high; 3. The design has a long service life; 4. Flexible interface; 5. Support remote upgrade service; 6. Comes with LCD display. Technical parameter: Working voltage: 12~24VDC Operating temperature: -40~+85°C Protection class: IP65 Surge level: four wind speed Range: 0~50m/s (0~75m/s optional) Accuracy: 0.2m/s (0-10m/s), ±2% (>10m/s) Resolution: 0.1m/s wind direction Range: 0～360° Accuracy: ±1° Resolution: 1° ambient temperature Range: -40～+85℃ Accuracy: ±0.2°C Resolution: 0.1°C relative humidity Range: 0~100% (0~80℃) Accuracy: ±2%RH Resolution: 1% Atmospheric pressure Range: 200～1200hPa Accuracy: ±0.5hPa(-10~+50℃) Resolution: 0.1hPa rainfall Range: 0～24mm/min Accuracy: 0.5mm/min Resolution: 0.01mm/min total solar radiation Range: 0～2000W/㎡ Resolution: 1W/㎡ Sensitivity: 7~14μV/W·m² Response time (95%): ≤20s Nonlinearity: <2% Annual stability: ≤2% direct solar radiation Range: 0～2000W/㎡ Resolution: 1W/㎡ Sensitivity: 7~14μV/W·m² Response time (95%): ≤20s Nonlinearity: <2% Annual stability: ≤2% sun scattered radiation Range: 0～2000W/㎡ Resolution: 1W/㎡ Sensitivity: 7~14μV/W·m² Response time (95%): ≤20s Nonlinearity: <2% Annual stability: ≤2% Component temperature Range: -40～+200℃ Accuracy: ±0.1°C Resolution: 0.1°C
Introduction: SD300 series photovoltaic power station environmental monitoring system is an outdoor use, fully automatic environmental monitoring system. It can collect parameters such as ambient temperature, atmospheric relative humidity, photovoltaic module temperature, wind speed, wind direction, atmospheric pressure, rainfall, total solar radiation, solar scattered radiation, and direct solar radiation. It can meet the monitoring needs of photovoltaic power stations for surrounding environmental data. The main sensors, core collectors and supporting software used in the system are independently developed and produced by our company, so the whole system has good compatibility and consistency, and can meet various system working modes required by different tasks. The overall design of modular structure, through different configurations of software and hardware, and matching with different communication carriers, can be used as a wired telemetry station and a fully automatic unmanned station.
