SCIENTZ-500C constant temperature ultrasonic extraction instrument Introduction: SCIENTZ-C series shaped charge constant temperature ultrasonic extraction instrument is a new type of ultrasonic extraction/extraction device that uses modern ultrasonic technology and intelligent low-temperature constant temperature system as physical means. The 20KHz focused high-power ultrasonic transducer is used to directly immerse the ultrasonic probe into the container containing the material. The temperature sensor measures the temperature of the material. The container containing the material is put into a thermostatic container. The required temperature can be set according to the user's needs, so that the material can be fully and rapidly extracted/extracted under the direct action of the ultrasonic under the low temperature and constant temperature environment. characteristic: 1. High-efficiency ultrasonic technology, magnetic stirring system and constant temperature control system make the reaction more sufficient 2. Intelligent automatic tracking of frequency according to the reaction environment can automatically achieve the best ultrasonic effect 3. Mode selectable high-power ultrasonic and thermostatic system can be used in combination or separately 4. The operation is simple, and the special multi-mouth reaction bottle can meet the requirements of filling various gases to participate in the reaction, and can also be continuously fed 5. Intelligent storage can set data, store data and control working state 6. Flexible parameters, adjustable ultrasonic power, time and reaction temperature 7. High safety, fault self-diagnosis and alarm prompt function Technical parameters: Ultrasonic power MAX: 900W Volume of reaction bottle: 500ml Probe diameter: Ф 10mm Power adjustable range: 15% - 100% Ultrasonic frequency: 22 ± 1KHz Total ultrasonic time: 1-999min can be set Ultrasonic time: 1-99S, settable Gap time: 1-99S can be set Compressor power: 500W Heating power: 1000W Temperature control mode: PID automatic temperature control Temperature measurement method: dual-channel temperature measurement, monitoring the real-time temperature in the reaction system and constant temperature working bath. Temperature control range: 0-99 ℃ Temperature control fluctuation: ≤± 1 ℃ Constant temperature volume: 6L Abnormal alarm function: Yes, the equipment has fault self-diagnosis and alarm prompt function Operation recording mode: the equipment has a working curve screen to record the change information of temperature and other parameters during operation Equipment control mode: 7-inch TFT touch screen and single-chip integrated control. Equipment operation mode: direct operation on the touch screen, setting temperature, power, time and other parameters USB communication port: the device is equipped with USB communication port, which can be inserted into the USB flash disk, and the curve and other information can be saved to the USB flash disk in the form of pictures Remote communication serial port: This function is optional. Users who need it can purchase (including upper computer software) to connect with the computer. Reaction bottle: generally, it is a four-mouth bottle. Users who need it can choose to buy a five-mouth bottle.
Introduction: SCIENTZ-C series shaped charge constant temperature ultrasonic extraction instrument is a new type of ultrasonic extraction/extraction device that uses modern ultrasonic technology and intelligent low-temperature constant temperature system as physical means. The 20KHz focused high-power ultrasonic transducer is used to directly immerse the ultrasonic probe into the container containing the material. The temperature sensor measures the temperature of the material. The container containing the material is put into a thermostatic container. The required temperature can be set according to the user's needs, so that the material can be fully and rapidly extracted/extracted under the direct action of the ultrasonic under the low temperature and constant temperature environment.
