Instrument overview: SC-217 grease cone penetration tester is designed and manufactured according to the requirements of national standard ASTM D217 "grease and oil cone penetration test method" and the international standard ISO2137 "grease and oil cone penetration test method". It is applicable to the cone penetration test of various grease and oil. Can be configured with relevant standard accessories for solid fine particles, powders, powders, all kinds of paste, adhesive substances. This instrument also conforms to the detection performance specified in gb1790-2003 "pharmaceutical vaseline" standard. It is widely used to measure the softness and hardness of lubricating grease, petroleum jelly and pharmaceutical ointment products or other semi-solid substances. It plays an important role in the process of design, quality control and identification of product characteristics. Performance characteristics: 1. The measuring mechanism is composed of digital display ruler, cone electric lock, manual button and timer. 2. Set fine-tuning anchor screws, which can be used to adjust the level of the base table. 3, the upper and lower mediation mechanism is composed of support rod, support arm and upper and lower thickness adjustment knob. 4. The advanced adjustment handwheel is divided into coarse adjustment and fine adjustment double lifting adjustment mechanism, which is convenient for the needle point to be aligned with the sample plane and has the function of self-locking. Technical parameters: 1. Working power supply: AC220V 10% 50Hz 2. Measuring range: 0 ~ 600 taper units 3. Release stroke: over 62 mm 4. Digital caliper: 0 ~ 100mm 5. Display accuracy: 0.01mm 6. Minimum reading: 0.1 taper unit 7. Timing range: 5 seconds 8. Overall dimension: 540 295 370mm 9. Weight of the instrument: about 25kg 10.Grease operator: it conforms to GB/T269 standard (1) full size workpiece stroke 71mm (2) 1/2 ratio of the work stroke of 35 mm (3) 1/4 scale workpiece stroke 14 mm 11. (1) full size cone mass 102.5 0.05g cone rod mass 47.5 0.05g (optional) （2）The total mass of 1/2 ratio cone and rod is 37.5 0.05g, the mass of cone is 22.5 0.025g, and the mass of cone rod is 15 0.025g(optional). （3）1/4 proportional vertebra and total weight of cone and rod 9.38 0.025g(optional)
Instrument overview: SC-217 grease cone penetration tester is designed and manufactured according to the requirements of national standard ASTM D217 "grease and oil cone penetration test method" and the international standard ISO2137 "grease and oil cone penetration test method". It is applicable to the cone penetration test of various grease and oil. Can be configured with relevant standard accessories for solid fine particles, powders, powders, all kinds of paste, adhesive substances. This instrument also conforms to the detection performance specified in gb1790-2003 "pharmaceutical vaseline" standard. It is widely used to measure the softness and hardness of lubricating grease, petroleum jelly and pharmaceutical ointment products or other semi-solid substances. It plays an important role in the process of design, quality control and identification of product characteristics.
