Introduction: SC-11143 lubricant corrosion tester is based on the national standard GB / T 11143 "plus inhibitory mineral oil in the presence of water anti-rust performance test method," the requirements of the design and manufacture. It is applicable to the test method proposed by GB / T 11143 standard to evaluate the anti-rust ability of inhibitor oil, especially turbine oil, on iron parts when mixed with water. It is also suitable for evaluating the anti-rust ability of other oil products, such as hydraulic oil, circulating oil and liquids heavier than water, against iron parts. Features: 1, using PID temperature control technology, high temperature control accuracy. 2, the instrument uses stainless steel as a bath, anti-corrosion. 3, a separate clamping sleeve, to ensure that no turbulence during the experiment. 4, using cold-rolled steel production, corrosion-resistant, easy to clean function. Technical Parameters: 1, working power: 220 ± 10%, 50Hz 2, temperature range: room temperature ~ 100 ℃ 3, display mode: digital display 4, when the control range: 1min-24h 5, heating power: 600W, 1000W 6, temperature control accuracy: ± 1.0 ℃ 7, mixing speed: 1000 ± 50 rev / min 8, test hole: 4 holes 9, motor power: 90W
Introduction: SC-11143 lubricant corrosion tester is based on the national standard GB / T 11143 "plus inhibitory mineral oil in the presence of water anti-rust performance test method," the requirements of the design and manufacture. It is applicable to the test method proposed by GB / T 11143 standard to evaluate the anti-rust ability of inhibitor oil, especially turbine oil, on iron parts when mixed with water. It is also suitable for evaluating the anti-rust ability of other oil products, such as hydraulic oil, circulating oil and liquids heavier than water, against iron parts.
