Introduction: The SC-0193 Lubricating Oil Oxidation Stability Tester is designed and manufactured in accordance with the requirements of the People's Republic of China industry standard SH/T0193 "Lubricating Oil Oxidation Stability Test (Rotating Oxygen Bomb Method)", using industrial computer automatic control. It is suitable for the determination of the oxidation stability of new and used turbine oils with the same composition (base oils and additives). It can also be used to evaluate new mineral insulating oils containing 2,6-di-tert-butyl-p-cresol as The first instrument for rapid assessment of oxidation stability. Features: 1. This instrument is designed and manufactured to meet the SH/T0193 standard and a powerful software data processing system. 2, can automatically test the pressure of the oil sample, data recording, oxidation time calculation, and can automatically end the test. 3. The whole test process of the instrument is carried out automatically and the operation is simple. Automatically judge the pressure inflection point and automatically end the test 4. Automatically record data and test results during the test. The history is queried, compared, and the pressure curve is printed. 5, the original imported rotating device, stable speed and low noise. Technical Parameters 1, working power: AC220, ± 10% v, 50HZ 2, heating tube power: 2500W 3, pressure sensor range: 0 ~ 1.6MPa, accuracy: ± 2 ‰ 4, oil bath temperature control range: room temperature ~ 200.0 ° C continuously adjustable 5, temperature control accuracy: ± 0.1 ° C 6, test form: two bombs, can do two samples at the same time 7, rotating mechanism speed: 100 ± 5r / min 8. The angle between the oxygen bomb and the horizontal plane: 30° 9, oil bath volume: 30L;
Introduction: The SC-0193 Lubricating Oil Oxidation Stability Tester is designed and manufactured in accordance with the requirements of the People's Republic of China industry standard SH/T0193 "Lubricating Oil Oxidation Stability Test (Rotating Oxygen Bomb Method)", using industrial computer automatic control. It is suitable for the determination of the oxidation stability of new and used turbine oils with the same composition (base oils and additives). It can also be used to evaluate new mineral insulating oils containing 2,6-di-tert-butyl-p-cresol as The first instrument for rapid assessment of oxidation stability.
