Introduction: The instrument uses the microcoulon principle, which can be used to detect the salt content of crude oil, condensate oil, heavy oil and residue oil. It can also be used to detect salt content or chloride ion content in various industrial water and discharge water. It has stable performance, easy operation and analysis Data reproducibility and so on. Applicable standards: ZBE21001-87, SY / T0536, the main configuration: salt content tester host, centrifuge, mixer, water bath, computer, etc. Features: 1, salt content tester with a special ceramic sand core instead of ion-exchange membrane, measuring the sensitivity to improve, to avoid ion film damage to bring the wrong results. 2, the electrolytic cell using imported brown quartz material, reducing the interference of natural light on the experiment, without the need to install the mask, simplify the injection operation. 3, the use of corrosion-resistant electrode cap, to avoid corrosion due to electrolyte electrode cap, electrode contact bad, resulting in a large error detection results. Technical Parameters: Measuring range: Salt content: 0.2 to 10000 mg NaCl / L, Chloride ion: 0.1ppm to percentage Measurement accuracy and repeatability error: Sample (or standard sample) concentration ≤ 1 mgNaCl / L, ≤± 0.1mg / L, Sample (or standard) concentration> 1 mg NaCl / L, ≤ 10%. End point detection method: through the instructions - the reference electrode to automatically determine the instrument, automatic data processing; Analysis time: <3min / sample (without sample treatment); LIMS system: support LIMS system connection; Sampling amount: 1g ± 0.2g; Power supply: AC 220V ± 22V, 50Hz ± 0.5Hz; Power: 3000W.
Introduction: The instrument uses the microcoulon principle, which can be used to detect the salt content of crude oil, condensate oil, heavy oil and residue oil. It can also be used to detect salt content or chloride ion content in various industrial water and discharge water. It has stable performance, easy operation and analysis Data reproducibility and so on. Applicable standards: ZBE21001-87, SY / T0536, the main configuration: salt content tester host, centrifuge, mixer, water bath, computer, etc.