QL-S3000C computer multielement analyzer Brief introduction
QL-S3000C computer infrared universal conjunction element analysis instrument is the exclusive ownership of the company, the most advanced a multi-element analyzer, by the combination of the company's patented technology of BS1000A computer precision elemental analyzer (national key new products) and HW2000E (c) infrared carbon sulfur xyl-ii (brand-name products in Jiangsu Province) and. QL-S3000C type universal element analyzer through the infrared and colorimetric principle of accurate detection, the configuration of the physical and chemical laboratory of collocation was perfect, its performance, quality and accuracy of the requirements to achieve the international standard Features
1. The brand computer control of microcomputer, full Chinese menu type operation, desktop printer to print the results.
2. Process control is realized by using computer and single chip microcomputer technology and data processing. Can quickly and accurately measure the mass fraction of multiple elements in steel and non-ferrous metals, a high degree of automation, accurate and reliable quantitative charging less test dose etc, to improve the analysis accuracy and precision, can display the quality score and print directly.
3. Use patented technology of cold light source, imports of photoelectric element, self-correcting zero and full;
4. Electronic balance online quantitative sample, not the computer automatically read in weight or artificial type in optional, convenient operation analysis.
5. Three channel, each channel had thirty small channel (article can store 30 work curve), channel curve can also be based on user needs of arbitrary increase;
6. Replace the cold light have different wavelengths preset potentiometer adjustment is convenient, expanding the scope of the measuring element types and content;
7. Closed to dissolve sample, easy to operate, no valve and pipeline aging, prolong service life. Technical parameter
Measurement range: (because the instrument can detect more elements, now in the steel C, Mn, Si, P, Cr, Ni, Mo, Re, Mg, Fe, Cu, Al, S, V, Ti, W and other common elements for example)
Carbon: 0.001-10% , sulfur: 0.0005 - 0.5000%,
Manganese 0.10 ~ 15%, silicon 0.10 ~ 5%, phosphorus 0.005 ~ 0.80%,
CR 0.01 ~ 25%, Mo 0.101 ~ 6%, Mg 0.010 ~ 0.100%,
Nickel 0.010 ~ 30%, rare earth 0.01 ~ 0.100%,......
Such as changing the test conditions, the range can be expanded accordingly.
Analysis time: five minutes or so (IR)
Analysis error: better than GB223.3 ~ 5 ~ 1988, GB223.68 ~ 69-1997 and other national standards
Methods: carbon and sulfur were analyzed by infrared spectrophotometry, and other multi - element method was used in this method, the photoelectric colorimetric method, and the wavelength range of 400 ~ 800nm
Computer control continuous adjustable.
The standard sample curves: the multi element partial memory storage 99 curve (can be according to the user need any increase), uses the regression method, establishes the curve equation.
Input / output mode: brand computer control, data export format can be set according to the requirements of the laboratory, printer output.
The QL-S3000C all-round element analyzer combines the infrared and colorimetric principles to perfectly match the configuration of the physical and chemical laboratory. Its requirements for performance, quality and precision have fully met international standards.
