Brief introduction: Used for testing the resistance to ozone aging performance of rubber and its products. Can be used for non-metallic materials, organic materials, coating, rubber, plastic, paint, paint, etc.) under the condition of ozone aging test. Perform (meet) standards: ASTM1149 ISO1431 GB7762-2003 GB/T136421-92 HG/GJB1217 T2869-97 Features: 1. Stainless steel test accord with international standard warehouse 2. Manufacture and capture the ozone closed gas circuit 3. The adjusted within the range of 10 to 500 PPHM ozone concentration 4. The motor drive and test apparatus 5. According to international standard, the equipment can realize the ozone concentration, temperature, air flow, the adjustment of the relative humidity 6. The ozone gas occurrence and capture all is closed loop, to ensure personal safety Technical parameters: Ozone concentration: 10 ~ 1000 PPHM. (adjustable) Ozone concentration deviation of 5% or less Laboratory temperature: room temperature + 10 ℃ ~ 60 ℃ Temperature fluctuation degree, plus or minus 0.5 ℃ Uniformity: plus or minus 2 ℃ Test gas flow: 20 ~ 80 l/min The gas flow rate: 12 ~ 16 mm/s Test unit: static (fixture) to throw in 3 sets of manual stretching Frame speed: 360 rotary rack (speed 1 revolutions per minute) Source: ozone ozone generator (ozone) using voltage silent discharge tube Sensors: Britain imported ozone concentration sensor, can achieve precise control
Brief introduction: Used for testing the resistance to ozone aging performance of rubber and its products. Can be used for non-metallic materials, organic materials, coating, rubber, plastic, paint, paint, etc.) under the condition of ozone aging test. Perform (meet) standards: ASTM1149 ISO1431 GB7762-2003 GB/T136421-92 HG/GJB1217 T2869-97
